Marilia Pivetta Rippe

Produção Bibliográfica

    2022 (Total: 3)
  • doi ISSN Effect of immediate dentin sealing and temporary cement removal on bond strength of resin cements to dentin (BRAZILIAN DENTAL SCIENCE)
  • doi ISSN Surface milled by CAD-CAM system Vs laboratorial methods to simulate the milled surface: Effect on the resin bond strength to lithium disilicate glass-ceramic (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)
  • doi ISSN Surface Treatments and Adhesives Used to Increase the Bond Strength Between Polyetheretherketone and Resin-based Dental Materials: A Scoping Review (JOURNAL OF ADHESIVE DENTISTRY)
    2021 (Total: 5)
  • doi ISSN Different Etching Times of a One-step Ceramic Primer: Effect on the Resin Bond Strength Durability to a CAD/CAM Lithium-Disilicate Glass-Ceramic (JOURNAL OF ADHESIVE DENTISTRY)
  • doi ISSN Fatigue Behavior of Monolithic Zirconia-Reinforced Lithium Silicate Ceramic Restorations: Effects of Conditionings of the Intaglio Surface and the Resin Cements (OPERATIVE DENTISTRY (ONLINE))
  • doi ISSN In-lab simulation of CAD/CAM milling of lithium disilicate glass-ceramic specimens: Effect on the fatigue behavior of the bonded ceramic (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Load-bearing capacity under fatigue and FEA analysis of simplified ceramic restorations supported by Peek or zirconia polycrystals as foundation substrate for implant purposes (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Surface treatments and its effects on the fatigue behavior of a 5% mol yttria partially stabilized zirconia material (Journal of the Mechanical Behavior of Biomedical Materials)
    2020 (Total: 7)
  • doi ISSN Does acid etching prior to applying universal adhesives affect the bond strength of glass fiber post to root dentin? (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)
  • ISSN Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing (Journal of Prosthodontic Research)
  • doi ISSN Fatigue Failure Load of a Bonded Simplified Monolithic Feldspathic Ceramic: Influence of Hydrofluoric Acid Etching and Thermocycling (OPERATIVE DENTISTRY)
  • doi ISSN Fatigue performance of distinct CAD/CAM dental ceramics (Journal of the Mechanical Behavior of Biomedical Materials)
  • ISSN Influence of zirconia surface treatments of a bilayer restorative assembly on the fatigue performance (Journal of Prosthodontic Research)
  • doi ISSN Stable Resin Bonding to Y-TZP Ceramic with Air Abrasion by Alumina Particles Containing 7% Silica (JOURNAL OF ADHESIVE DENTISTRY)
  • doi ISSN The number of specimens in a furnace affects the biaxial flexural strength of veneered zirconia specimens after sintering (JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY)
    2019 (Total: 6)
  • doi ISSN Air-abrasion using new silica-alumina powders containing different silica concentrations: Effect on the microstructural characteristics and fatigue behavior of a Y-TZP ceramic (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Effect of zirconia surface treatment, resin cement and aging on the load-bearing capacity under fatigue of thin simplified full-contour Y-TZP restorations (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Influence of finishing/polishing on the fatigue strength, surface topography, and roughness of an yttrium-stabilized tetragonal zirconia polycrystals subjected to grinding (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Low-fusing porcelain glaze application does not damage the fatigue strength of Y-TZP (Journal of the Mechanical Behavior of Biomedical Materials)
  • ISSN Resin bond strength to zirconia: effects of surface treatments and resin cements (GENERAL DENTISTRY)
  • doi ISSN Surface treatments of a glass-fiber reinforced composite: Effect on the adhesion to a composite resin (Journal of Prosthodontic Research)
    2018 (Total: 10)
  • doi ISSN Effect of different impression methods and ceramic materials on adaptation of inlays (BRAZILIAN DENTAL SCIENCE)
  • doi ISSN Effect of Grinding and Multi-Stimuli Aging on the Fatigue Strength of a Y-TZP Ceramic (BRAZILIAN DENTAL JOURNAL)
  • doi ISSN Effect of Resin Luting Systems and Alumina Particle Air Abrasion on Bond Strength to Zirconia (OPERATIVE DENTISTRY)
  • doi ISSN Fatigue failure load of an adhesively-cemented lithium disilicate glass-ceramic: Conventional ceramic etching vs etch & prime one-step primer (DENTAL MATERIALS)
  • doi ISSN Fatigue Failure Load of Restored Premolars: Effect of Etching the Intaglio Surface of Ceramic Inlays With Hydrofluoric Acid at Different Concentrations (OPERATIVE DENTISTRY)
  • doi ISSN How does hydrofluoric acid etching affect the cyclic load-to-failure of lithium disilicate restorations? (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Mechanical performance of Y-TZP monolithic ceramic after grinding and aging: survival estimates and fatigue strength (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations (Journal of the Mechanical Behavior of Biomedical Materials)
  • doi ISSN Polishing of Ground Y-TZP Ceramic is Mandatory for Improving the Mechanical Behavior (BRAZILIAN DENTAL JOURNAL)
  • doi ISSN Survival rate and load to failure of premolars restored with inlays: An evaluation of different inlay fabrication methods (JOURNAL OF PROSTHETIC DENTISTRY)
    2017 (Total: 9)
  • doi ISSN Clinical performance and failure modes of pulpless teeth restored with posts: a systematic review (Brazilian Oral Research)
  • doi ISSN Different Methods for Inlay Production: Effect on Internal and Marginal Adaptation, Adjustment Time, and Contact Point (OPERATIVE DENTISTRY)
  • doi ISSN Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding and post-processing treatments (Journal of the Mechanical Behavior of Biomedical Materials)
  • ISSN In vitro methods to evaluate the mechanical behavior of teeth restored with post and core: a structured review (Revista da Faculdade de Odontologia - UPF)
  • doi ISSN Influence of Endodontic Treatment and Retreatment on the Fatigue Failure Load, Numbers of Cycles for Failure, and Survival Rates of Human Canine Teeth (JOURNAL OF ENDODONTICS)
  • doi ISSN Influence of zirconia surface treatments on resin cement bonding and phase transformation (Journal of Adhesion Science and Technology (Print))
  • doi ISSN Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystal: Effects of different aging regimens (BRAZILIAN ORAL RESEARCH)
  • doi ISSN Retentive Strength of Y-TZP Crowns: Comparison of Different Silica Coating Methods on the Intaglio Surfaces (OPERATIVE DENTISTRY)
  • doi ISSN Surface micro-morphology, phase transformation, and mechanical reliability of ground and aged monolithic zirconia ceramic (Journal of the Mechanical Behavior of Biomedical Materials (Print))
    2016 (Total: 6)
  • doi ISSN Are posts necessary for the restoration of root filled teeth with limited tissue loss? A structured review of laboratory and clinical studies (International Endodontic Journal (Print))
  • doi ISSN Comparison of different low-temperature aging protocols: its effects on the mechanical behavior of Y-TZP ceramics (Journal of the Mechanical Behavior of Biomedical Materials (Print))
  • doi ISSN Effect of the frequency of mechanical pulses for fatigue aging testing on push-out bond strength between glass fiber posts and root dentin (Journal of Adhesion Science and Technology (Print))
  • doi ISSN Fatigue limit of polycrystalline zirconium oxide ceramics: effect of grinding and low-temperature aging (Journal of the Mechanical Behavior of Biomedical Materials (Print))
  • doi ISSN Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging (Materials Science & Engineering. C, Biomimetic Materials, Sensors and Systems (Print))
  • doi ISSN Silicone Disclosing Material used after Ceramic Surface Treatment Reduces Bond Strength (Journal of Adhesive Dentistry)
    2015 (Total: 2)
  • ISSN Inlays Made From a Hybrid Material: Adaptation and Bond Strengths (Operative Dentistry)
  • doi ISSN Resin Bonding to a Hybrid Ceramic: Effects of Surface Treatments and Aging (Operative Dentistry)
    2014 (Total: 4)
  • doi ISSN Canal Preparation and Filling Techniques do not Influence the Fracture Resistance of Extensively Damaged Teeth (Brazilian Dental Journal (Impresso))
  • doi ISSN Effect of root canal preparation, type of endodontic post and mechanical cycling on root fracture strength (Journal of Applied Oral Science (Impresso))
  • doi ISSN Evaluation of Tensile Retention of Y-TZP Crowns After Long-term Aging: Effect of the Core Substrate and Crown Surface Conditioning (Operative Dentistry)
  • doi ISSN Evaluation of Tensile Retention of Y-TZP Crowns Cemented on Resin Composite Cores: Effect of the Cement and Y-TZP Surface Conditioning (Operative Dentistry)
    2013 (Total: 2)
  • doi ISSN Root Canal Filling: Fracture Strength of Fiber-Reinforced Composite-Restored Roots and Finite Element Analysis (Brazilian Dental Journal (Impresso))
  • doi ISSN Surface agents' influence on the flexural strength of bilaminated ceramics (Brazilian Oral Research (Impresso))
    2011 (Total: 2)
  • ISSN Adhesion between fiber post and root dentin: evaluation of post surface conditioning for bond strength improvement. (Minerva Stomatologica (Testo stampato))
  • ISSN Multi-steps adhesive cementation Vs one-step adhesive cementation: push-out bond strength between fiber and root dentin before and after mechanical cycling. (General Dentistry)
    2010 (Total: 1)
  • ISSN Intrusão dentária e sequelas (Revista de endodontia (UFSM))
    2020 (Total: 1)
  • doi New Materials for CAD/CAM Systems: Resin-Based Composites, Polymer-Infiltrated Ceramic Network, Zirconia-Reinforced Lithium Silicate, and High Translucent Zirconia (Esthetic Oral Rehabilitation with Veneers)
    2018 (Total: 5)
  • Adhesion and strength properties of air-abraded Y-TZP: Distinct silica-coating concentration (Academy of Dental Materials Annual Meeting)
  • Cyclic load-to-failure of hydrofluoric acid etched lithium disilicate restorations (Academy of Dental Materials Annual Meeting)
  • Flexural-strength and translucency of feldspar-ceramic: Specimen?s number-position in furnace effect (Academy of Dental Materials Annual Meeting)
  • Survival rate of restored premolars: Evaluation of inlay fabrication methods (Academy of Dental Materials Annual Meeting)
  • Translucent zirconia: Mechanical reliability, fatigue strength, survival and phase analysis (Academy of Dental Material Annual Meeting)
    2016 (Total: 2)
  • COMPORTAMENTO MECÂNICO DE UMA CERÂMICA Y-TZP APÓS DIFERENTES PROTOCOLOS DE ENVELHECIMENTO (52º Encontro do Grupo Brasileiro de Materiais Dentários)
  • EFEITOS DE DIFERENTES TRATAMENTOS DA SUPERFÍCIE INTERNA DE COROAS EM Y-TZP NA RESISTÊNCIA À TRAÇÃO (52º Encontro do Grupo Brasileiro de Materiais Dentários)
    2015 (Total: 3)
  • Effect of different low-temperature aging protocols on the mechanical behavior of YTZP ceramic (23rd European Dental Materials Conference)
  • Effect of different treatments of YTZP internal surface crowns the tensile resistance (23rd European Dental Materials Conference)
  • Effect of grinding and low-temperature aging on the mehanical behavior of a ceramic for YZ monolithic restorations (23rd European Dental Materials Conference)
    2014 (Total: 3)
  • Effect of different surface treatments on resin-bonding to hybrid material (Academy of Dental Materials)
  • Inlays made of a hybrid material: Adaptation and bond strengths (Academy of Dental Materials)
  • Low-temperature degradation effect on the mechanical behavior of ground Y-TZP (Academy of Dental Materials)
    2013 (Total: 2)
  • Crowns based on Y-TZP: Evaluation of different strategies for cementing (Academy of Dental Materials Annual Meeting)
  • YTZP crowns retention varying the substrate, surface treatment and cement (49º Encontro Brasileiro de Materiais Dentários)
    2012 (Total: 6)
  • Avaliação da resistência à tração de coroas de zircônia YTZP sob diferentes protocolos de cimentação. (6o Encontro do Grupo Brasileiro de Reciclagem em Prótese e Implante)
  • Canal Root Obturation: Fracture Strength of FRC-restored roots and FEA (IADR Meeting)
  • Effect of Mechanical Cycling Frequency on Fiber-Post/Dentin Adhesion (IADR Meeting)
  • Influence of root canal treatment techniques on fracture resistance (IADR Meeting)
  • Influência de diferentes agentes de superfície na resistência à flexão de espécimes cerâmicos (6o Encontro do Grupo Brasileiro de Reciclagem em Prótese e Implante)
  • Retention of YTZP Crowns: Evaluation of Different Strategies for Cementation. (Academy of dental materials)
    2011 (Total: 2)
  • Effect of canal root obturation on fracture strength of roots (Academy of dental materials)
  • Effect of cycle frequency of mechanical fatigue on bond strength (Academy of dental materials)
    2010 (Total: 3)
  • Efeito da técnica de obturação e da ciclagem mecânica na resistência à fratura de raízes (27ª SBPQO)
  • Efeito do preparo do canal radicular, tipo de pino radicular, e ciclagem mecânica na resistência à fratura de raízes (27ª SBPQO)
  • Instrumentation, post and mechanical cycling effects on fracture strength on roots (Academy of Dental Materials Annual Meeting)
    2009 (Total: 2)
  • Efeito da ciclagem mecânica na união entre pino de fibra e dentina: avaliação de duas estratégias de cimentação. (26ª Reunião Anual da SBPqO)
  • Resistência adesiva entre pinos de fibra e dentina intrarradicular em função do condicionamento da superfície dos pinos (26ª Reunião anual da SBPqO)
    2007 (Total: 1)
  • Tracionamento de dente intruído com fratura coronária Pós- Trauma - Relato clínico Endo -Orto. (XI Simpósio de Ensino Pesquisa e Extenção- SEPE 2007: Humanização, ciência e cultura-UNIFRA)

Produção Técnica

    2004 (Total: 1)
  • Membro da Comissão Organizadora da II Conferência Municipal de Saúde Bucal
    2013 (Total: 1)
  • Experiências acadêmicas - Relato Pessoal
    2013 (Total: 2)
  • Crowns based on Y-TZP: Evaluation of different strategies for cementing
  • Retenção de coroas em zircônia YTZP com diferentes substratos, tratamentos de superfície e cimentos
    2012 (Total: 3)
  • Avaliação da resistência à tração de coroas de zircônia YTZP sob diferentes protocolos de cimentação
  • Canal Root Obturation: Fracture Strength of FRC-restored roots and FEA
  • Retention of YTZP Crowns: Evaluation of Different Strategies for Cementation.
    2011 (Total: 1)
  • Effect of cycle frequency of mechanical fatigue on bond strength
    2010 (Total: 2)
  • Efeito do preparo do canal radicular, tipo de pino radicular, e ciclagem mecânica na resistência à fratura de raízes
  • Instrumentation, post and mechanical cycling effects on fracture strength on roots
    2009 (Total: 1)
  • Efeito da ciclagem mecânica na união entre pino de fibra e dentina: avaliação de duas estratégias de cimentação
    2008 (Total: 3)
  • Cisto ósseo Traumático
  • Confecção de Prótese Parcial Removível com Utilização de Dentes Naturais
  • Tratamento das Seqüelas da Intrusão Dentária
    2007 (Total: 1)
  • Lesão Traumática em Dente com Rizogênese Incompleta - Relato Clínico
    2010 (Total: 2)
  • Efeito da técnica de obturação e ciclagem mecânica na resistência à fratura de raízes
  • Effect of root preparation, type of root post and mechanical cycling on fracture strength of roots
    2007 (Total: 1)
  • Tracionamento de Dente Intruído com Fratura Coronária Pós-trauma - Relato Clínico Endo-Orto
    2022 (Total: 3)
  • Revisor de periódico 'Brazilian Oral Research (Impresso)'
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'
    2021 (Total: 3)
  • Revisor de periódico 'Brazilian Oral Research (Impresso)'
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'
    2020 (Total: 3)
  • Revisor de periódico 'Brazilian Oral Research (Impresso)'
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'
    2019 (Total: 3)
  • Revisor de periódico 'Brazilian Oral Research (Impresso)'
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'
    2018 (Total: 3)
  • Revisor de periódico 'Brazilian Oral Research (Impresso)'
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'
    2017 (Total: 3)
  • Revisor de periódico 'Brazilian Oral Research (Impresso)'
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'
    2016 (Total: 2)
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'
    2015 (Total: 2)
  • Revisor de periódico 'Journal of Adhesion Science and Technology'
  • Revisor de periódico 'Revista de Odontologia da UNESP (Online)'

Produção Artística

Não informado

Orientações Concluídas

    2021 (Total: 1)
  • Simulação in-lab da fresagem em CAD/CAM de uma cerâmica de dissilicato de lítio: efeito no comportamento mecânico e na resistência de união
    2017 (Total: 2)
  • Influência de diferentes abordagens de cimentação da cerâmica YTZP na resistência à fadiga
  • Influência do número e da posição de espécimes cerâmicos bilayer no forno de sinterização na resistência à fadiga e opacidade
    2016 (Total: 1)
  • EFEITO DO CONDICIONAMENTO DE INLAYS CERÂMICAS COM DIFERENTES CONCENTRAÇÕES DE ÁCIDO FLUORÍDRICO NA CARGA DE FRATURA SOB FADIGA DE PRÉ-MOLARES RESTAURADOS
    2016 (Total: 1)
  • EFEITO DE DIFERENTES PROTOCOLOS DE CIMENTAÇÃO NA RESISTÊNCIA À FADIGA DE UMA CERÂMICA DE ZIRCÔNIA PARA RESTAURAÇÕES MONOLÍTICAS
    2017 (Total: 1)
  • IMPACTO DO CONDICIONAMENTO COM ÁCIDO FLUORÍDRICO NA RESISTÊNCIA À FADIGA DE UMA CERÂMICA FELDSPÁTICA CIMENTADA COM UM SISTEMA AUTOADESIVO
    2016 (Total: 4)
  • DIFERENTES ESTRATÉGIAS ADESIVAS NA RESISTÊNCIA DE UNIÃO ENTRE MATERIAL DE PINO DE FIBRA DE VIDRO E RESINA COMPOSTA
  • EFEITO DE DIFERENTES PROTOCOLOS DE LIMPEZA DO CIMENTO PROVISÓRIO NA RESISTÊNCIA DE UNIÃO DE CIMENTOS AUTO-ADESIVOS À DENTINA
  • Impacto do condicionamento com ácido fluorídrico na resistência à fadiga térmica e mecânica de uma cerâmica feldspática
  • INFLUÊNCIA DA QUANTIDADE E DO POSICIONAMENTO DE ESPÉCIMES DE CERÂMICA FELDSPÁTICA NO FORNO DE SINTERIZAÇÃO SOBRE A SUA RESISTÊNCIA BIAXIAL E OPACIDADE
    2015 (Total: 1)
  • Avaliação da rugosidade de diferentes cerâmicas feldspáticas em agentes corrosivos