doi ISSN Comparative Analysis of CAD-CAM Workflow Variations on the Marginal and Internal Gaps and Fatigue Behavior of Ceramic and Resin Composite Dental Crowns (European Journal of Dentistry)

doi ISSN Does the Restoration Design and Material Affect Indirect Restorations' Marginal and Internal Gap, Interfacial Volume, and Fatigue Behavior? (European Journal of Dentistry)

doi ISSN Effectiveness of surface treatments on fatigue and static flexural bond strength of a CAD-CAM resin composite (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Evaluation of Mechanical Strength, Translucency, and Microstructure in Graded Zirconia Layers Before and After Hydrothermal Aging (JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS)

doi ISSN Fatigue performance of 4YSZ: Effect of finishing/polishing protocol and surface treatments of the bonding surface (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of core material and occlusal contact pattern on fatigue behavior of different monolithic ceramic crowns (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Optimizing adhesion protocols between 3D-printed ceramic-containing composite and resin cement (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN 3D printed, subtractive, and conventional acrylic resins: Evaluation of monotonic versus fatigue behavior and surface characteristics (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Brittle dental ceramics: A challenge in dentistry (Dental And Medical Problems)

doi ISSN Characteristic fatigue strength and reliability of dental glass-ceramics: Effect of distinct surface treatments - Hydrofluoric acid etching and silane treatment vs one-step self-etching ceramic primer (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Conventional-, bulk-fill- or flowable-resin composites as prosthetic core build-up: Influence on the load-bearing capacity under fatigue of bonded leucite-reinforced glass-ceramic (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Cyclic fatigue of a repaired 4 YSZ ceramic: Effect of the repair protocol on the adhesive and mechanical behavior (HELIYON)

doi ISSN Effect of brushing simulation on the wear behavior of repaired CAD-CAM restorations (INTERNATIONAL DENTAL JOURNAL)

doi ISSN Evaluating mechanical and surface properties of zirconia-containing composites: 3D printing, subtractive, and layering techniques (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Exploring fiberglass post numbers for enhanced fatigue resistance in molars without coronary remnants (BRAZILIAN DENTAL JOURNAL)

doi ISSN Fatigue and failure mode analyses of glass infiltrated 5Y-PSZ bonded onto dentin analogues (Scientific Reports)

doi ISSN Fatigue behavior of multilayer ceramic structures in traditional and reverse layering designs (Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry)

doi ISSN Fatigue behavior of sintered, glazed and glass-infiltrated surfaces of 5Y-PSZ bonded plates (BRAZILIAN ORAL RESEARCH)

doi ISSN How do different intraoral scanners and milling machines affect the fit and fatigue behavior of lithium disilicate and resin composite endocrowns? (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of CAD-CAM milling strategies on the outcome of indirect restorations: A scoping review (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Is adhesive bonding with high and low viscosity cements able to revert the negative effect of machining on the fatigue behavior of lithium disilicate glass-ceramic? (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Is dentin analogue material a viable substitute for human dentin in fatigue behavior studies? (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Repair of monolithic zirconia restorations with different direct resin composites: effect on the fatigue bonding and mechanical performance (CLINICAL ORAL INVESTIGATIONS (PRINT))

doi ISSN Repair protocols for indirect monolithic restorations: a literature review (PeerJ)

doi ISSN Surface treatments for polyetheretherketone (Peek): Effects on the bond strength to a resin cement and on the fatigue performance of a bonded glass ceramic (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN A brief review on fatigue test of ceramic and some related matters in Dentistry (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Adhesion to lithium disilicate glass-ceramics after aging: Resin viscosity and ceramic surface treatment effects (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Ceramic surface conditioning, resin cement viscosity, and aging relationships affect the load-bearing capacity under fatigue of bonded glass-ceramics (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Comparing the accuracy of distinct scanning systems and their impact on marginal/internal adaptation of tooth-supported indirect restorations. A scoping review (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Do We Still Need Intraradicular Retainers? Current Perspectives on the Treatment of Endodontically Treated Teeth (CURRENT ORAL HEALTH REPORTS)

doi ISSN Does partial adhesive preparation design and finish line depth influence trueness and precision of intraoral scanners? (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Effect of immediate dentin sealing on load-bearing capacity under accelerated fatigue of thin occlusal veneers made of CAD-CAM glass-ceramic and resin composite material (DENTAL MATERIALS)

doi ISSN Effect of resin cement elastic modulus on the biaxial flexural strength and structural reliability of an ultra-thin lithium disilicate glass-ceramic material (CLINICAL ORAL INVESTIGATIONS (PRINT))

doi ISSN Effect of the region of the CAD/CAM block on the flexural strength and structural reliability of restorative materials (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Endocrown restorations in premolars: influence of remaining axial walls of tooth structure and restorative materials on fatigue resistance (CLINICAL ORAL INVESTIGATIONS (PRINT))

doi ISSN Fatigue behavior, failure mode, and stress distribution of occlusal veneers: influence of the prosthetic preparation cusp inclinations and the type of restorative material (CLINICAL ORAL INVESTIGATIONS (PRINT))

doi ISSN Fatigue performance analysis of strength-graded zirconia polycrystals for monolithic three-unit implant-supported prostheses (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Fatigue survival of endodontically treated teeth restored with different fiber-reinforced composite resin post strategies versus universal 2-piece fiber post system: An in vitro study (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Fit and fatigue behavior of CAD-CAM lithium disilicate crowns (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN High-versus low-viscosity resin cements: Its effect on the load-bearing capacity under fatigue of a translucent zirconia (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN How does the occlusal contact region influence the mechanical fatigue performance and fracture region of monolithic lithium disilicate ceramic crowns? (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of height discrepancy between pulp chamber floor and crestal bone in the mechanical fatigue performance of endodontically-treated teeth restored with resin composite endocrowns (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of number and position of porcelain specimens in the furnace on flexural strength and translucency (BRAZILIAN JOURNAL OF ORAL SCIENCES)

doi ISSN Load-bearing capacity under fatigue of bonded-yttria tetragonal zirconia polycrystals and -yttria-stabilized zirconia: Effects of the viscosity of a dual-cured resin cement (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Longevity of metal-ceramic single crowns cemented onto resin composite prosthetic cores with self-adhesive resin cement: an update of a prospective analysis with up to 106 months of follow-up (CLINICAL ORAL INVESTIGATIONS (PRINT))

doi ISSN Mechanical Behavior of Repaired Monolithic Crowns: A 3D Finite Element Analysis (DENTISTRY JOURNAL)

doi ISSN Polishing the bonding surface, before or after crystallization, does not alter the fatigue behavior of bonded CAD-CAM lithium disilicate (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Resin cement coating reverts the machining damage on the flexural fatigue strength of lithium disilicate glass¿ceramic (JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS)

doi ISSN Should finishing, polishing or glazing be performed after grinding YSZ ceramics? A systematic review and meta-analysis (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Survival rate and treatment success of glass fiber posts cemented with two adhesive cementation strategies after up to 106 months: a randomized clinical trial (CLINICAL ORAL INVESTIGATIONS (PRINT))

doi ISSN The loss of resin cement adhesion to ceramic influences the fatigue behavior of bonded lithium disilicate restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Weak adhesion between ceramic and resin cement impairs the load-bearing capacity under fatigue of lithium disilicate glass-ceramic crowns (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Adhesion to a new CAD-CAM resin composite: Effects of the machining roughness simulation, surface treatments, and long-term aging (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Adhesion to a Zirconia-reinforced Lithium Silicate Ceramic: Effects of Ceramic Surface Treatments and Resin Cements (OPERATIVE DENTISTRY (ONLINE))

doi ISSN Adhesive application after ceramic surface treatment is detrimental to load-bearing capacity under fatigue of a lithium disilicate glass-ceramic (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN AFM advanced modes for dental and biomedical applications (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Bond strength and Weibull analysis of fiber posts luted with different cement types and mechanically aged (JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY)

doi ISSN Cement Choice and the Fatigue Performance of Monolithic Zirconia Restorations (OPERATIVE DENTISTRY (ONLINE))

doi ISSN Cyclic fatigue tests on non-anatomic specimens of dental ceramic materials: A scoping review (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Cyclic fatigue vs static loading for shear bond strength test of lithium disilicate and dentin substrates: A comparison of resin cement viscosities (DENTAL MATERIALS)

doi ISSN Do resin cement viscosity and ceramic surface etching influence the fatigue performance of bonded lithium disilicate glass-ceramic crowns? (DENTAL MATERIALS)

doi ISSN Does Adhesive Luting Reinforce the Mechanical Properties of Dental Ceramics Used as Restorative Materials? A Systematic Review and Meta-Analysis (JOURNAL OF ADHESIVE DENTISTRY)

doi ISSN Does adhesive luting promote improved fatigue performance of lithium disilicate simplified crowns? (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Effect of hydrothermal and mechanical aging on the fatigue performance of high-translucency zirconias (DENTAL MATERIALS)

doi ISSN Effect of immediate dentin sealing and temporary cement removal on bond strength of resin cements to dentin (BRAZILIAN DENTAL SCIENCE)

doi ISSN Effect of pigmentation techniques on the fatigue mechanical behavior of a translucent zirconia for monolithic restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Effect of the composition and manufacturing process on the resin microtensile bond strength to ceramics (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Effects of material and piston diameter on the fatigue behavior, failure mode, and stress distribution of feldspathic ceramic simplified restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Fatigue behavior and stress distribution of molars restored with MOD inlays with and without deep margin elevation (Clinical Oral Investigations)

doi ISSN Fatigue Properties of Weakened and Non-weakened Roots Restored with CAD-CAM Milled Fiber Post, Prefabricated Fiber Post, or Cast Metal Post (OPERATIVE DENTISTRY (ONLINE))

doi ISSN Fatigue strength of 5Y-FSZ: glazing and polishing effects (CLINICAL ORAL INVESTIGATIONS (PRINT))

doi ISSN In-lab simulation of CAD/CAM grinding and intaglio surface treatments of 4YSZ monolithic restorations: Effect on its load-bearing capacity under fatigue (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of connector cross-sectional geometry on the load-bearing capacity under fatigue of implant-supported zirconia fixed partial prosthesis (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Is the application of a silane-based coupling agent necessary to stabilize the fatigue performance of bonded simplified lithium disilicate restorations? (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Masking ability of implant abutment substrates by using different ceramic restorative systems (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Mechanical characterization of a multi-layered zirconia: Flexural strength, hardness, and fracture toughness of the different layers (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Novel cinnamon-laden nanofibers as a potential antifungal coating for poly(methyl methacrylate) denture base materials (Clinical Oral Investigations)

doi ISSN Pigmentation techniques of a 4YSZ: Effect on the fatigue mechanical behavior of a 4YSZ adhesively luted onto dentin analog (DENTAL MATERIALS)

doi ISSN Pre-sintering pigmentation techniques do not affect the fatigue behavior of adhesively luted 4YSZ restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Simulation of CAD/CAM milling on lithium disilicate: Mechanical and topographic analyses of surface grinding different protocols (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Sintering mode of a translucent : Effects on its biaxial flexure fatigue strength, surface morphology and translucency (Journal of Esthetic and Restorative Dentistry)

doi ISSN Surface milled by CAD-CAM system Vs laboratorial methods to simulate the milled surface: Effect on the resin bond strength to lithium disilicate glass-ceramic (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Surface Treatments and Adhesives Used to Increase the Bond Strength Between Polyetheretherketone and Resin-based Dental Materials: A Scoping Review (JOURNAL OF ADHESIVE DENTISTRY)

doi ISSN Thickness and internal adjustment of monolithic resin composite milled crowns: Effect on the load-bearing capacity under fatigue (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Adhesion between zirconia and resin cement: A critical evaluation of testing methodologies (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Alumina particle air-abrasion and aging effects: Fatigue behavior of CAD/CAM resin composite crowns and flexural strength evaluations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Could different direct restoration techniques affect interfacial gap and fracture resistance of endodontically treated anterior teeth? (Clinical Oral Investigations)

doi ISSN Different Etching Times of a One-step Ceramic Primer: Effect on the Resin Bond Strength Durability to a 
CAD/CAM Lithium-Disilicate Glass-Ceramic (JOURNAL OF ADHESIVE DENTISTRY)

doi ISSN Effect of different surface treatments on optical, colorimetric, and surface characteristics of a lithium disilicate glass-ceramic (Journal of Esthetic and Restorative Dentistry)

doi ISSN External Marginal Gap Variation and Residual Fracture Resistance of Composite and Lithium-Silicate CAD/CAM Overlays after Cyclic Fatigue over Endodontically-Treated Molars (Polymers)

doi ISSN Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing (Journal of Prosthodontic Research)

doi ISSN Fatigue behavior of bonded lithium disilicate glass-ceramic simplified restorations is not damaged by the finishing/grinding of the bonding surface of dentin analogue material (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Fatigue Behavior of Monolithic Zirconia-Reinforced Lithium Silicate Ceramic Restorations: Effects of Conditionings of the Intaglio Surface and the Resin Cements (OPERATIVE DENTISTRY (ONLINE))

doi ISSN Fatigue failure load of prefabricated fiber reinforced post: The influence of the post diameter and fatigue test method (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Fatigue performance of adhesively luted glass or polycrystalline CAD-CAM monolithic crowns (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Fatigue resistance of simplified CAD-CAM restorations: Foundation material and ceramic thickness effects on the fatigue behavior of partially- and fully-stabilized zirconia (DENTAL MATERIALS)

doi ISSN Grinding and polishing of the inner surface of monolithic simplified restorations made of zirconia polycrystals and lithium disilicate glass-ceramic: Effects on the load-bearing capacity under fatigue of the bonded restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN In-lab simulation of CAD/CAM milling of lithium disilicate glass-ceramic specimens: Effect on the fatigue behavior of the bonded ceramic (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of Alternative and Conventional Surface Treatments on the Bonding Mechanism between PEEK and Veneering Resin for Dental Application (Coatings)

doi ISSN Influence of different contaminants and cleansing agents on bond strength and in situ degree of conversion of composite-adhesive interface (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Influence of surface treatment of resin composite substrate on the load-bearing capacity under fatigue of lithium disilicate monolithic simplified restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of testing environment on static fatigue behavior of a glass and a polycrystalline ceramic (BRAZILIAN DENTAL JOURNAL)

doi ISSN Influence of the foundation substrate on the fatigue behavior of bonded glass, zirconia polycrystals, and polymer infiltrated ceramic simplified CAD-CAM restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of zirconia surface treatments of a bilayer restorative assembly on the fatigue performance (Journal of Prosthodontic Research)

doi ISSN Load-bearing capacity under fatigue and FEA analysis of simplified ceramic restorations supported by Peek or zirconia polycrystals as foundation substrate for implant purposes (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Mechanical behavior and microstructural characterization of different zirconia polycrystals in different thicknesses (Journal of Advanced Prosthodontics)

doi ISSN Spectrophotometric analysis of dental bleaching after bonding and debonding of orthodontic brackets (THE SAUDI DENTAL JOURNAL)

doi ISSN Step-stress vs. staircase fatigue tests to evaluate the effect of intaglio adjustment on the fatigue behavior of simplified lithium disilicate glass-ceramic restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Surface treatments and its effects on the fatigue behavior of a 5% mol yttria partially stabilized zirconia material (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN The influence of roughness on the resistance to impact of different CAD/CAM dental ceramics (BRAZILIAN DENTAL JOURNAL)

doi ISSN The number of specimens in a furnace affects the biaxial flexural strength of veneered zirconia specimens after sintering (JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY)

doi ISSN Accelerated loading frequency does not influence the fatigue behavior of polymer infiltrated ceramic network or lithium disilicate glass-ceramic restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Ceramic firing protocols and thermocycling: effects on the load-bearing capacity under fatigue of a bonded zirconia lithium silicate glass-ceramic (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Effect of Different Surface Treatments of Resin Relined Fiber Posts Cemented With Self-adhesive Resin Cement on Push-out and Microtensile Bond Strength Tests (OPERATIVE DENTISTRY (ONLINE))

doi ISSN Effect of resin cement space on the fatigue behavior of bonded CAD/CAM leucite ceramic crowns (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Endodontic sealers and post-endodontic waiting time affect the bond strength of the fiber posts (REVISTA DE ODONTOLOGIA DA UNESP (ONLINE))

doi ISSN Fatigue Failure Load of a Bonded Simplified Monolithic Feldspathic Ceramic: Influence of Hydrofluoric Acid Etching and Thermocycling (OPERATIVE DENTISTRY)

doi ISSN Fatigue performance of distinct CAD/CAM dental ceramics (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Fatigue performance of fully-stabilized zirconia polycrystals monolithic restorations: The effects of surface treatments at the bonding surface (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Grinding of composite cores using diamond burs with different grit sizes (BRAZILIAN JOURNAL OF ORAL SCIENCES)

doi ISSN Grinding the intaglio surface of yttria partially- and fully-stabilized zirconia polycrystals restorations: Effect on their fatigue behavior (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Grinding, polishing and glazing of the occlusal surface do not affect the load-bearing capacity under fatigue and survival rates of bonded monolithic fully-stabilized zirconia simplified restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN High load frequency at 20Hz: Its effects on the fatigue behavior of a leucite-reinforced glass-ceramic (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of shading technique on mechanical fatigue performance and optical properties of a 4Y-TZP ceramic for monolithic restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Mechanical Fatigue Analysis of PEEK as Alternative to Zirconia for Definitive Hybrid Abutments Supporting All-Ceramic Crowns (INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS)

doi ISSN Microstructure, topography, surface roughness, fractal dimension, internal and marginal adaptation of pressed and milled lithium-disilicate monolithic restorations (Journal of Prosthodontic Research)

doi ISSN One-step ceramic primer as surface conditioner: Effect on the load-bearing capacity under fatigue of bonded lithium disilicate ceramic simplified restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Silica infiltration in partially stabilized zirconia: Effect of hydrothermal aging on mechanical properties (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Stable Resin Bonding to Y-TZP Ceramic with Air Abrasion by Alumina Particles Containing 7% Silica (JOURNAL OF ADHESIVE DENTISTRY)

doi ISSN Surface treatments of a glass-fiber reinforced composite: Effect on the adhesion to a composite resin (Journal of Prosthodontic Research)

ISSN Zircônia como alternativa para restaurações monolíticas (ImplantNews Reabilitação Oral)

doi ISSN A study on stress distribution to cement layer and root dentin for post and cores made of CAD/CAM materials with different elasticity modulus in the absence of ferrule (JOURNAL OF CLINICAL AND EXPERIMENTAL DENTISTRY)

doi ISSN Air-abrasion using new silica-alumina powders containing different silica concentrations: Effect on the microstructural characteristics and fatigue behavior of a Y-TZP ceramic (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: Fatigue performance and ceramic surface characteristics (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Comparison of endocrowns made of lithium disilicate glass-ceramic or polymer-infiltrated ceramic networks and direct composite resin restorations: fatigue performance and stress distribution (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Effect of Ferrule Thickness on Fracture Resistance of Teeth Restored With a Glass Fiber Post or Cast Post (OPERATIVE DENTISTRY)

doi ISSN Effect of zirconia polycrystal and stainless steel on the wear of resin composites, dentin and enamel (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Effect of zirconia surface treatment, resin cement and aging on the load-bearing capacity under fatigue of thin simplified full-contour Y-TZP restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Fatigue failure load and finite element analysis of multilayer ceramic restorations (DENTAL MATERIALS)

doi ISSN Fatigue Failure Load of Lithium Disilicate Restorations Cemented on a Chairside Titanium-Base (Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry)

doi ISSN Fatigue Failure Load of Resin-bonded Simplified Lithium Disilicate Glass-Ceramic Restorations: Effect of Ceramic Conditioning Methods (JOURNAL OF ADHESIVE DENTISTRY)

doi ISSN Fatigue performance of adhesively cemented glass-, hybrid- and resin-ceramic materials for CAD/CAM monolithic restorations (DENTAL MATERIALS)

doi ISSN In vitro wear of a zirconium-reinforced lithium silicate ceramic against different restorative materials (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Influence of finishing/polishing on the fatigue strength, surface topography, and roughness of an yttrium-stabilized tetragonal zirconia polycrystals subjected to grinding (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Lithium disilicate glass-ceramic Vs translucent zirconia polycrystals bonded to distinct substrates: fatigue failure load, number of cycles for failure, survival rates, and stress distribution (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Load-bearing capacity under fatigue and survival rates of adhesively cemented yttrium-stabilized zirconia polycrystal monolithic simplified restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Low-fusing porcelain glaze application does not damage the fatigue strength of Y-TZP (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Newer vs. older CAD/CAM burs: Influence of bur experience on the fatigue behavior of adhesively cemented simplified lithium-disilicate glass-ceramic restorations (Journal of the Mechanical Behavior of Biomedical Materials)

ISSN OS DESAFIOS DA CIMENTAÇÃO ADESIVA - COMO O TRATAMENTO DE SUPERFÍCIE DE CERÂMICAS VÍTREAS AGE NO COMPORTAMENTO MECÂNICO DAS RESTAURAÇÕES E NA ADESÃO A CIMENTOS RESINOSOS (PRÓTESENEWS)

doi ISSN Sequential usage of diamond bur for CAD/CAM milling: effect on the roughness, topography and fatigue strength of lithium disilicate glass ceramic (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Silica coating followed by heat-treatment of MDP-primer for resin bond stability to yttria-stabilized zirconia polycrystals (JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS)

doi ISSN Strength of a Zirconia-Reinforced Lithium Silicate Ceramic: Acid-Etching Time and Resin Cement Application Effects (INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY)

doi ISSN Survival rate and load to failure of premolars restored with inlays: An evaluation of different inlay fabrication methods (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Y-TZP surface treatments and their effects on the bond strength to resin cement (BRAZILIAN JOURNAL OF ORAL SCIENCES)

doi ISSN A Multicenter Randomized Double-blind Controlled Clinical Trial of Fiber Post Cementation Strategies (OPERATIVE DENTISTRY)

doi ISSN Adhesion to a Lithium Disilicate Glass Ceramic Etched with Hydrofluoric Acid at Distinct Concentrations (BRAZILIAN DENTAL JOURNAL)

doi ISSN Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments (BRAZILIAN ORAL RESEARCH)

doi ISSN Ceramic Surface Treatment with a Single-component Primer: Resin Adhesion to Glass Ceramics. (JOURNAL OF ADHESIVE DENTISTRY)

doi ISSN Does Finishing and Polishing of Restorative Materials Affect Bacterial Adhesion and Biofilm Formation? A Systematic Review (OPERATIVE DENTISTRY)

doi ISSN Does Luting Strategy Affect the Fatigue Behavior of Bonded Y-TZP Ceramic? (JOURNAL OF ADHESIVE DENTISTRY)

doi ISSN Does the fatigue loading frequency affect the lithium disilicate glass ceramic inlay-dentin bond strength? (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

ISSN Effect of different impression methods and ceramic materials on adaptation of inlays (BRAZILIAN DENTAL SCIENCE)

doi ISSN Effect of grinding and aging on subcritical crack growth of a Y-TZP ceramic (BRAZILIAN ORAL RESEARCH)

doi ISSN Effect of Grinding and Multi-Stimuli Aging on the Fatigue Strength of a Y-TZP Ceramic (Brazilian Dental Journal)

doi ISSN Effect of Post-Space Irrigation with NaOCl And CaOCl at Different Concentrations on the Bond Strength of Posts Cemented with a Self-Adhesive Resin Cement (BRAZILIAN DENTAL JOURNAL)

doi ISSN Effect of Resin Luting Systems and Alumina Particle Air Abrasion on Bond Strength to Zirconia (OPERATIVE DENTISTRY)

doi ISSN Effect of the bonding strategy on the tensile retention of full-contour zirconia crowns (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Effects of bonding area size, surface treatment and specimen configuration on the push out test for assessing bonding and stress distribution to Y-TZP (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN Elastic Properties of Lithium Disilicate Versus Feldspathic Inlays: Effect on the Bonding by 3D Finite Element Analysis (Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry)

doi ISSN Endodontic Sealers Affect the Bond Strength of Fiber Posts and the Degree of Conversion of Two Resin Cements. (JOURNAL OF ADHESIVE DENTISTRY)

ISSN Evaluation of marginal leakage after mechanical fatigue cycling of composite inlays luted with different cements (GENERAL DENTISTRY)

doi ISSN Fatigue failure load of an adhesively-cemented lithium disilicate glass-ceramic: Conventional ceramic etching vs etch & prime one-step primer (DENTAL MATERIALS)

doi ISSN Fatigue failure load of feldspathic ceramic crowns after hydrofluoric acid etching at different concentrations (JOURNAL OF PROSTHETIC DENTISTRY)

doi ISSN Fatigue failure load of two resin-bonded zirconia-reinforced lithium silicate glass-ceramics: Effect of ceramic thickness (DENTAL MATERIALS)

doi ISSN Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: Effect of etching time and hydrofluoric acid concentration (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Fatigue Failure Load of Restored Premolars: Effect of Etching the Intaglio Surface of Ceramic Inlays With Hydrofluoric Acid at Different Concentrations (OPERATIVE DENTISTRY)

doi ISSN Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations (BRAZILIAN ORAL RESEARCH)

doi ISSN How does hydrofluoric acid etching affect the cyclic load-to-failure of lithium disilicate restorations? (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Hydrofluoric acid concentrations: Effect on the cyclic load-to-failure of machined lithium disilicate restorations (DENTAL MATERIALS)

doi ISSN Influence of remaining coronal thickness and height on biomechanical behavior of endodontically treated teeth: survival rates, load to fracture and finite element analysis (JOURNAL OF APPLIED ORAL SCIENCE (ONLINE))

doi ISSN Influência da Concentração e do Tempo de Condicionamento com Ácido Hidrofluorídrico na Rugosidade e Morfologia Superficial de uma Zircônia Glazeada (REVISTA BRASILEIRA CIÊNCIAS DA SAÚDE)

doi ISSN Internal adjustments decrease the fatigue failure load of bonded simplified lithium disilicate restorations (DENTAL MATERIALS)

doi ISSN Mechanical performance of Y-TZP monolithic ceramic after grinding and aging: Survival estimates and fatigue strength (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Polishing of Ground Y-TZP Ceramic is Mandatory for Improving the Mechanical Behavior (BRAZILIAN DENTAL JOURNAL)

doi ISSN The effect of hydrofluoric acid concentration on the fatigue failure load of adhesively cemented feldspathic ceramic discs (DENTAL MATERIALS)

doi ISSN Adhesive Cementation Promotes Higher Fatigue Resistance to Zirconia Crowns (Operative Dentistry)

doi ISSN Bonding strategies to full-contour zirconia: Zirconia pretreatment with piranha solution, glaze and airborne-particle abrasion (INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES)

doi ISSN CAD/CAM machining Vs pre-sintering in-lab fabrication techniques of Y-TZP ceramic specimens: Effects on their mechanical fatigue behavior (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Clinical performance and failure modes of pulpless teeth restored with posts: a systematic review (Brazilian Oral Research)

doi ISSN Different Methods for Inlay Production: Effect on Internal and Marginal Adaptation, Adjustment Time, and Contact Point (OPERATIVE DENTISTRY)

doi ISSN Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia (Brazilian Oral Research)

doi ISSN Effect of etching with distinct hydrofluoric acid concentrations on the flexural strength of a lithium disilicate-based glass ceramic (JOURNAL OF BIOMEDICAL MATERIALS RESEARCH. PART B, APPLIED BIOMATERIALS)

doi ISSN Effect of operator experience and cementation strategies on the bond strength between fiber post and root dentin (Journal of Adhesion Science and Technology (Print))

doi ISSN Effects of two grading techniques of zirconia material on the fatigue limit of full-contour 3-unit fixed dental prostheses (Dental Materials)

doi ISSN Endodontic Irrigation Protocols: Effects on Bonding of Adhesive Systems to Coronal Enamel and Dentin (Journal of Esthetic and Restorative Dentistry)

doi ISSN Fatigue failure load of monolithic Y-TZP three-unit-fixed dental prostheses: Effect of grinding at the gingival zone of the connector (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding and post-processing treatments (Journal of the Mechanical Behavior of Biomedical Materials)

doi ISSN Grinding With Diamond Burs and Hydrothermal Aging of a Y-TZP Material: Effect on the Material Surface Characteristics and Bacterial Adhesion (OPERATIVE DENTISTRY)

doi ISSN Impact of machining on the flexural fatigue strength of glass and polycrystalline CAD/CAM ceramics (DENTAL MATERIALS)

doi ISSN In vitro methods to evaluate the mechanical behavior of teeth restored with post and core: a structured review (Revista da Faculdade de Odontologia. Universidade de Passo Fundo)

doi ISSN Influence of Endodontic Treatment and Retreatment on the Fatigue Failure Load, Numbers of Cycles for Failure, and Survival Rates of Human Canine Teeth (JOURNAL OF ENDODONTICS)

doi ISSN Influence of zirconia surface treatments on resin cement bonding and phase transformation (JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY)

doi ISSN Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study (BRAZILIAN ORAL RESEARCH)

doi ISSN Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystal: Effects of different aging regimens (Brazilian Oral Research)

doi ISSN Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystalline ceramic after different zirconia surface treatments (Materials Science & Engineering C-Materials for Biological Applications)

doi ISSN Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation (BRAZILIAN DENTAL SCIENCE)

doi ISSN Retentive Strength of Y-TZP Crowns: Comparison of Different Silica Coating Methods on the Intaglio Surfaces (OPERATIVE DENTISTRY)

doi ISSN Surface micro-morphology, phase transformation, and mechanical reliability of ground and aged monolithic zirconia ceramic (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Are posts necessary for the restoration of root filled teeth with limited tissue loss? A structured review of laboratory and clinical studies (International Endodontic Journal (Print))

doi ISSN Bacterial Colonization in the Marginal Region of Ceramic Restorations: Effects of Different Cement Removal Methods and Polishing (Operative Dentistry)

doi ISSN Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength (Operative Dentistry)

doi ISSN Comparison of different low-temperature aging protocols: its effects on the mechanical behavior of Y-TZP ceramics (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Comparison of methanol/hydrochloric, ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide (Journal of Adhesion Science and Technology (Print))

doi ISSN Effect of etching with different hydrofluoric acid concentrations on bond strength between glazed feldspathic ceramic and metal brackets (Brazilian Dental Science)

doi ISSN Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic (Brazilian oral research)

doi ISSN Effect of Intracanal Irrigants on Bond Strength of Fiber Posts Cemented With a Self-adhesive Resin Cement (Operative Dentistry)

doi ISSN Effect of the frequency of mechanical pulses for fatigue aging testing on push-out bond strength between glass fiber posts and root dentin (Journal of Adhesion Science and Technology (Print))

doi ISSN Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation (Journal of Adhesion Science and Technology (Print))

doi ISSN Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-reinforced Lithium Silicate Ceramic (Operative Dentistry)

doi ISSN Fatigue limit of polycrystalline zirconium oxide ceramics: effect of grinding and low-temperature aging (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Fatigue Resistance of Y-TZP/Porcelain Crowns is Not Influenced by the Conditioning of the Intaglio Surface (Operative Dentistry)

doi ISSN Fractographical Analysis and Biomechanical Considerations of a Tooth Restored With Intracanal Fiber Post: Report of the Fracture and Importance of the Fiber Arrangements (Operative Dentistry)

doi ISSN Influence of drying time of adhesive systems on the bond strength between resin cement and feldspathic ceramic (Brazilian Dental Science)

doi ISSN Loading frequencies up to 20Hz as an alternative to accelerate fatigue strength tests in a Y-TZP ceramic (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Low-Fusing Porcelain Glaze Application on 3Y-TZP Surfaces can Enhance Zirconia-Porcelain Adhesion (Brazilian Dental Journal)

doi ISSN Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging (Materials Science & Engineering. C, Biomimetic Materials, Sensors and Systems (Print))

ISSN Os fatores decisivos na escolha de coroas monolíticas (ProteseNews)

doi ISSN Resin Bonding to a Hybrid Ceramic: Effects of Surface Treatments and Aging (Operative Dentistry)

doi ISSN The effect of grinding on the mechanical behavior of Y-TZP ceramics: A systematic review and meta-analyses (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Tribochemical Glass Ceramic Coating as a New Approach for Resin Adhesion to Zirconia (Journal of Adhesive Dentistry)

doi ISSN A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP (Dental Materials)

doi ISSN Adhesion to Y-TZP ceramic: Study of silica nanofilm coating on the surface of Y-TZP (Journal of Biomedical Materials Research. Part B, Applied Biomaterials)

doi ISSN Clinical outcomes and success rates of quartz fiber post restorations: A retrospective study (The Journal of Prosthetic Dentistry (Print))

doi ISSN Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent (Journal of Applied Oral Science (Impresso))

doi ISSN Effect of Ceramic Etching Protocols on Resin Bond Strength to a Feldspar Ceramic (Operative Dentistry)

doi ISSN Effect of Cleansing Methods on Saliva-Contaminated Zirconia¿An Evaluation of Resin Bond Durability (Operative Dentistry)

doi ISSN Effect of Hydrofluoric Acid Concentration on Resin Adhesion to a Feldspathic Ceramic (Journal of Adhesive Dentistry)

doi ISSN Effect of low-temperature aging on the mechanical behavior of ground Y-TZP (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Effect of two Resin Cements and two Fiber Post Surface Treatments on Push-out Bond Strength between Fiber Post and Root Dentin (The Journal of Contemporary Dental Practice)

doi ISSN Evaluation of Tensile Retention of Y-TZP Crowns Cemented on Resin Composite Cores: Effect of the Cement and Y-TZP Surface Conditioning (Operative Dentistry)

doi ISSN Fatigue behavior of Y-TZP Ceramic after Surface Treatments (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Fatigue surviving, fracture resistance, shear stress and finite element analysis of glass fiber posts with different diameters (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments (Journal of the Mechanical Behavior of Biomedical Materials (Print))

ISSN Fracture resistance of weakened roots restored with different intracanal retainers. (General Dentistry)

doi ISSN Hard machining, glaze firing and hydrofluoric acid etching: Do these procedures affect the flexural strength of a leucite glass-ceramic? (Dental Materials)

doi ISSN Heat treatment of silanized feldspathic ceramic: effect on the bond strength to resin after thermocycling (International Journal of Adhesion and Adhesives)

doi ISSN Influence of hydrofluoric acid concentration on the flexural strength of a feldspathic ceramic (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Influence of Insertion Techniques for Resin Cement and Mechanical Cycling on the Bond Strength Between Fiber Posts and Root Dentin (Journal of Adhesive Dentistry)

doi ISSN Inlays Made From a Hybrid Material: Adaptation and Bond Strengths (Operative Dentistry)

doi ISSN Low-temperature degradation of Y-TZP ceramics: A systematic review and meta-analysis (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Surface Treatments of Zirconia to Enhance Bonding Durability (Operative Dentistry)

doi ISSN Bonding of Y-TZP to Dentin: Effects of Y-TZP Surface Conditioning, Resin Cement Type, and Aging (Operative Dentistry (Online))

doi ISSN Canal Preparation and Filling Techniques do not Influence the Fracture Resistance of Extensively Damaged Teeth (Brazilian Dental Journal (Impresso))

doi ISSN Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic (Journal of the Mechanical Behavior of Biomedical Materials (Print))

ISSN Effect of mechanical cycling on microtensile bond strength between dentin and leucite ceramic restoration cemented by different strategies (Journal of Research in Dentistry)

doi ISSN Effect of root canal preparation, type of endodontic post and mechanical cycling on root fracture strength (Journal of Applied Oral Science (Impresso))

ISSN Effect of surface treatment of brackets and mechanical cycling on adhesion to enamel (General Dentistry)

doi ISSN Effect of the interfacial area measurement parameters on the push-out strength between fiber post and dentin (International Journal of Adhesion and Adhesives)

doi ISSN Effect of the Layering Technique on Bond Strength and Cohesive Resistance of a Porcelain-Zirconia System (Journal of Adhesive Dentistry)

doi ISSN Evaluation of Resin Bond Strength to Yttria-stabilized Tetragonal Zirconia and Framework Marginal Fit: Comparison of Different Surface Conditionings. (Operative Dentistry)

doi ISSN Evaluation of Tensile Retention of Y-TZP Crowns After Long-term Aging: Effect of the Core Substrate and Crown Surface Conditioning (Operative Dentistry)

ISSN Improved adhesion of Y-TZP ceramics: a novel approach for surface modification. (General Dentistry)

doi ISSN Influence of periodontal ligament simulation on bond strength and fracture resistance of roots restored with fiber posts (Journal of Applied Oral Science (Impresso))

ISSN Marginal adaptation and microleakage of two different zirconia based crowns systems luted with two different cements (General Dentistry)

doi ISSN Microtensile Bond Strength Between Indirect Composite Resin Inlays and Dentin: Effect of Cementation Strategy and Mechanical Aging. (Journal of Adhesive Dentistry)

ISSN Possíveis implicações do ajuste clínico de infraestruturas em zirconia (ProteseNews)

doi ISSN Preliminary Results of the Survival and Fracture Load of Roots Restored With Intracanal Posts: Weakened vs Nonweakened Roots (Operative Dentistry)

doi ISSN Pressable Feldspathic Inlays in Premolars: Effect of Cementation Strategy and Mechanical Cycling on the Adhesive Bond Between Dentin and Restoration (Journal of Adhesive Dentistry)

doi ISSN Survival Rate, Load to Fracture, and Finite Element Analysis of Incisors and Canines Restored With Ceramic Veneers Having Varied Preparation Design (Operative Dentistry)

doi ISSN The Effect of Mechanical Loading on the Cusp Deflection of Premolars Restored with Direct and Indirect Techniques (The Journal of Contemporary Dental Practice)

doi ISSN The potential of novel primers and universal adhesives to bond to zirconia (Journal of Dentistry)

doi ISSN Air-particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography. (Journal of the Mechanical Behavior of Biomedical Materials (Print))

ISSN Bond strength and stability of 3 luting systems on a zirconia-dentin complex. (General Dentistry)

doi ISSN Durability of Adhesion Between Feldspathic Ceramic and Resin Cements: Effect Adhesive Resin, Polymerization Mode of Resin Cement and Aging. (Journal of Prosthodontics (Print))

doi ISSN Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. (Journal of the Mechanical Behavior of Biomedical Materials (Print))

doi ISSN Effect of Post-silanization Heat Treatments of Silanized Feldspathic Ceramic on Adhesion to Resin Cement. (Journal of Adhesive Dentistry)

doi ISSN Effect of Resin Cement Type on the Microtensile Bond Strength to Lithium Disilicate Ceramic and Dentin Using Different Test Assemblies (Journal of Adhesive Dentistry)

doi ISSN Effect of seating forces on cement-ceramic adhesion in microtensile bond tests. (Clinical Oral Investigations (Print))

doi ISSN Effect of Surface Conditioning Modalities on the Repair Bond Strength of Resin Composite to the Zirconia Core / Veneering Ceramic Complex (Journal of Adhesive Dentistry)

doi ISSN Effect of the Etching Duration and the Ultrasonic Cleaning on Microtensile Bond Strength Between Feldspathic Ceramic and Resin Cement (The Journal of Adhesion (Print))

doi ISSN Influence of Endodontic Sealer Composition and Time of Fiber Post Cementation on Sealer Adhesiveness to Bovine Root Dentin (Brazilian Dental Journal (Impresso))

doi ISSN Influence of surface conditioning protocols on glass-fiber post adhesion performance after aging and on flexural strength (The Journal of Adhesion (Print))

doi ISSN Low-temperature degradation of a Y-TZP ceramic after surface treatments (Journal of Biomedical Materials Research. Part B, Applied Biomaterials)

doi ISSN Resin push-out bond between fiber post and root dentin: Evaluation of different cementation approaches (Archives of International Surgery)

doi ISSN Root Canal Filling: Fracture Strength of Fiber-Reinforced Composite-Restored Roots and Finite Element Analysis (Brazilian Dental Journal (Impresso))

doi ISSN Zirconia-Porcelain Bonding: Effect of Multiple Firings on Microtensile Bond Strength. (Journal of Adhesive Dentistry)

ISSN Bond strength of two resin cements to titanium after different surface conditioning methods. (General Dentistry)

doi ISSN Ceramic primer heat-treatment effect on resin cement/Y-TZP bond strength. (Operative Dentistry)

doi ISSN Composite resin to yttria stabilized tetragonal zirconia polycrystal bonding: comparison of repair methods. (Operative Dentistry)

ISSN Effect of brushing with conventional Vs whitening dentifrices on surface and biofilm formation of dental ceramics (General Dentistry)

ISSN Fiber Post Cementation Strategies: Effect of Mechanical Cycling on Push-out Bond Strength and Cement Polymerization Stress evaluation. [DOI: 10.3290/j.jad.a28389] (Journal of Adhesive Dentistry)

doi ISSN Fracture resistance of bovine incisors restored with different glass fiber posts: Effect of the diameter of fiber post (Indian Journal of Dental Research)

ISSN Fracture strength of endodontically treated teeth restored with different strategies after mechanical cycling (General Dentistry)

ISSN Impact of surface finishes on the flexural strength and fracture toughness of In-Ceram Zirconia (General Dentistry)

doi ISSN The disk-specimen height does not influence the push-out bond strength results between fiber post and root dentin (The Journal of Adhesion (Print))

ISSN Adhesion between fiber post and root dentin: evaluation of post surface conditioning for bond strength improvement (Minerva Stomatologica (Testo stampato))

doi ISSN Confocal laser microscopic analysis of biofilm on newer feldspar ceramic (Operative Dentistry)

doi ISSN Durability of Microtensile Bond to Nonetched and Etched Feldspar Ceramic: Self-adhesive Resin Cements vs Conventional Resin (Journal of Adhesive Dentistry)

doi ISSN Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-meta silanes (Odontology (Society of the Nippon Dental University))

ISSN Effect of fiber posts with different emerging diameters on the fracture strength of restored crownless teeth. (General Dentistry)

ISSN Effect of silane coupling agents and alloy primers on adhesion to titanium. (Minerva Stomatologica (Testo stampato))

ISSN Evaluation of four cementation strategies on the push-out bond strength between fiber post and root dentin. (General Dentistry)

ISSN Influence of cement thickness and mechanical cycling on the push-out bond strength between post and root dentin (General Dentistry)

doi ISSN Influence of different surface conditioning protocols on microtensile bond strength of self-adhesive resin cements to dentin. (The Journal of Prosthetic Dentistry (Print))

ISSN Mechanical fatigue cycling on teeth restored with fiber posts: impact of coronal grooves and diameter of glass fiber post on fracture resistance (Minerva Stomatologica (Testo stampato))

doi ISSN Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment (Journal of Conservative Dentistry)

ISSN Multi-steps adhesive cementation Versus one-step adhesive cementation: push-out bond strength between fiber and root dentin before and after mechanical cycling. (General Dentistry)

doi ISSN Pilot evaluation of 4 experimental conditioning treatments to improve the bond strength between resin cement and YTZP ceramic. (Journal of Prosthodontics (Print))

doi ISSN Resin Bonding to a Feldspar Ceramic After Different Ceramic Surface Conditioning Methods: Evaluation of Contact Angle, Surface pH, and Microtensile Bond Srength Durability. (Journal of Adhesive Dentistry)

doi ISSN Shear bond strength of resin cement bonded to alumina ceramic after treatment by aluminum oxide sandblasting or silica coating. (Journal of Prosthodontics (Print))

ISSN Silica coating on alumina ceramic: comparison of three chairside air-abrasion devices working for different times and distances. (Minerva Stomatologica (Testo stampato))

doi ISSN Strength of a feldspar ceramic according to the thickness and polymerization mode of the resin cement coating. (Dental Materials Journal)

ISSN Surviving of bovine teeth adhesively restored with 3 types of fiber post after mechanical cycling (Minerva Stomatologica (Testo stampato))

doi ISSN The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system (Dental Materials)

doi ISSN Adhesive quality of self-adhesive and conventional adhesive resin cement to Y-TZP ceramic before and after long-term storage and thermal cycling (Operative Dentistry)

doi ISSN Bond Strength of Two Resin Cements on Dentin using Different Cementation Strategies (Journal of Esthetic and Restorative Dentistry)

ISSN Caracterização in vitro de um novo sistema de resina composta de laboratório. (Odonto (UMESP))

ISSN Cementation of fiber post: influence of the cement insertion techniques on the bond strength of the fiber post - root dentin and the quality of the cement layer. (Minerva Stomatologica (Testo stampato))

ISSN Effect of cyclic loading on fracture strength and microleakage of a quartz fiber dowel with different adhesive, cement and resin core material combinations. (Minerva Stomatologica (Testo stampato))

doi ISSN Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic. (Journal of Biomedical Materials Research. Part B, Applied Biomaterials)

doi ISSN Translucency of zirconia copings made with different CAD/CAM systems. (The Journal of Prosthetic Dentistry (Print))

doi ISSN An in vitro comparison of different cementation strategies on pull-out strength of a glass fiber post. (Operative Dentistry)

doi ISSN Bond strength durability of a resin composite on a reinforced ceramic using various repair systems. (Dental Materials)

doi ISSN Comparison of resin push-out strength to root dentin of bovine- and human-teeth. (Indian Journal of Dental Research)

ISSN Durability of the bond strength of self-adhesive resin cements to human dentin. (General Dentistry)

doi ISSN Effect of acid neutralization and mechanical cycling on the microtensile bond strength of glass-ceramic inlays. (Operative Dentistry)

ISSN Effect of coronal macroretentions and diameter of a glass-FRC on fracture resistance of bovine teeth restored with fiber posts (Minerva Stomatologica)

ISSN Fatigue resistance of teeth restored with fiber posts and different post cementation strategies. (General Dentistry)

doi ISSN Flexural strength of glass-infiltrated zirconia/alumina-based ceramics and feldspathic veneering porcelains. (Journal of Prosthodontics (Print))

doi ISSN Fracture strength of endodontically treated teeth restored with post and cores and composite cores only (Operative Dentistry)

ISSN Surface roughness and bacterial adherence to composites and ceramics. (Oral Health and Preventive Dentistry)

ISSN Adherence of Streptococcus mutans to uncoated and saliva-coated glass-ceramics and composites. (General Dentistry)

doi ISSN Adhesive cementation of zirconia posts to root dentin: evaluation of the mechanical cycling effect. (Brazilian Oral Research)

ISSN Avaliação da resistência adesiva entre uma cerâmica reforçada por leucita e dois cimentos resinosos (Ciência Odontológica Brasileira)

doi ISSN Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers? instructions of the cements only. (Clinical Oral Investigations)

doi ISSN Does Adhesive Resin Application Contribute to Resin Bond Durability on Etched and Silanized Feldspathic Ceramic? (Journal of Adhesive Dentistry)

ISSN Does the bonded cross-sectional surface area affect the resin microtensile bond strength of resin cement to glass-ceramic? (Minerva Stomatologica)

doi ISSN Effect of Adhesive System Type and Tooth Region on the Bond Strength to Dentin (Journal of Adhesive Dentistry)

doi ISSN Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions. (Journal of Biomedical Materials Research. Part B, Applied Biomaterials)

doi ISSN Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test (Dental Materials Journal)

doi ISSN Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. (Dental Materials Journal)

ISSN Fatigue resistance of bovine teeth restored with resin bonded fiber posts: Effect of post surface conditioning. (General Dentistry)

ISSN Micro-morphological changes prior to adhesive bonding: high-alumina and glassy-matrix ceramics. (Brazilian Oral Research (Impresso))

ISSN Resin bonding to root canal dentin: effect of the application of an experimental hydrophobic resin coating after an all-in-one adhesive. (Journal of Contemporary Dental Practice)

ISSN Resistência adesiva entre uma cerâmica feldspática reforçada por leucita e dois cimentos resinosos. (Ciência Odontológica Brasileira)

ISSN SEM analysis of the in situ early bacterial colonization on two novel feldspathic ceramics submitted to different types of glazing. (Journal of Contemporary Dental Practice)

doi ISSN Y-TZP ceramic processing from coprecipitated powders: A comparative study with three commercial dental ceramics (Dental Materials)

doi ISSN Adhesives with different phs: effect on the µTBS of chemically activated and light-activated composites to human dentin. (Journal of Applied Oral Science)

ISSN Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling. (The International Journal of Prosthodontics)

doi ISSN Comparison of two bond strength testing methodologies for bilayered all-ceramics. (Dental Materials)

doi ISSN Effect of mechanical cycling on the push-out bond strength of fiber posts adhesively bonded to human root dentin. (Operative Dentistry)

doi ISSN Effects of Mechanical Cycling on the Bonding of Zirconia and Fiber Posts to Human Root Dentin (Journal of Adhesive Dentistry)

doi ISSN Influence of Brush Type as a Carrier of Adhesive Solutions and Paper Points as an Adhesive-excess Remover on the Resin Bond to Root Dentin (Journal of Adhesive Dentistry)

doi ISSN Microtensile bond strength of a repair composite to leucite-reinforced feldspathic ceramic. (Brazilian Dental Journal)

doi ISSN Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions. (Dental Materials)

ISSN Microtensile bond strength of a resin cement to silica-coated and silanized In-Ceram Zirconia ceramic before and after aging. (The International Journal of Prosthodontics)

doi ISSN Microtensile bond strength of photoactivated and autopolymerized adhesive systems to root dentin using translucent and opaque fiber-reinforced composite posts. (Journal of Prosthetic Dentistry)

ISSN Possibilità cliniche ed estetiche dei restauri protesici in Y.TPZ prodotti con il LAVA CAD-CAM System. (Quintessenza Odontotecnica)

ISSN Resin microtensile bond strength to feldspathic ceramic: hydrofluoric acid etching vs. tribochemical silica coating. (The International Journal of Prosthodontics)

ISSN SEM evaluation of in situ early bacterial colonization on a Y-TZP ceramic: a pilot study. (The International Journal of Prosthodontics)

doi ISSN Surface Conditioning of a Composite Used for Inlay/Onlay Restorations: Effect on µTBS to Resin Cement (Journal of Adhesive Dentistry)

ISSN The influence of cervical finish line, internal relief and cement type on the cervical adaptation of metal crowns. (Quintessence International)

ISSN Avaliação da resistência adesiva à microtração entre uma cerâmica prensada e dois cimentos resinosos. (PCL. Revista Brasileira de Prótese Clínica & Laboratorial)

ISSN Avaliação da resistência de união entre uma cerâmica prensada e dois cimentos resinosos. (Revista de Odontologia da UNESP)

ISSN Avaliação, por microtração, da resistência adesiva entre um cimento resinoso e uma cerâmica aluminizada com e sem o uso de um agente silanizador. (Odonto (São Bernardo do Campo))

ISSN Bond strength of dual-cured resin cements to a glass infiltrated alumina ceramic. (Ciência Odontológica Brasileira)

doi ISSN Bond Strength of a Resin Cement to High-alumina and Zirconia-reinforced Ceramics: The Effect of Surface Conditioning (Journal of Adhesive Dentistry)

ISSN Condicionamento de superfície cerâmica aluminizada: estudo em microscopia eletrônica de varredura e análise EDS. (Jornal Brasileiro de Clínica Odontológica Integrada)

ISSN Contração de polimerização de resina composta: revisão de literatura e relato de um caso clínico. (2812) (Jornal Brasileiro de Clínica Odontológica Integrada)

ISSN Does the thickness of the resin cement affect the bond strength of a fiber post to the root dentin? (The International Journal of Prosthodontics)

ISSN Early plaque colonization on polished- and glazed-zirconium ceramic surface: Preliminary results. (Minerva Stomatologica)

ISSN Efeito da ciclagem térmica na adesão entre uma cerâmica de di-silicato de litio e um cimento resinoso. (1689) (JBC. Jornal Brasileiro de Clínica Odontológica Integrada)

ISSN Effect of post length on the fatigue resistance of bovine teeth restored with bonded fiber post: a pilot study. (The International Journal of Prosthodontics)

doi ISSN Effect of root canal treatments on quartz fiber posts bonding to root dentin. (Journal of Endodontics)

ISSN Effect of silica coating on flexural strength of fiber posts. (The International Journal of Prosthodontics)

ISSN EFFECT OF THERMOCYCLING ON ADHESIVE UNION OF A LITHIUM DI-SILICATE PORCELAIN TO A RESINOUS LUTING CEMENT (JBC. Jornal Brasileiro de Clínica & Estética em Odontologia)

ISSN Estudo comparativo da efetvidade de selamento marginal de dois sistemas adesivos aplicados após a utilização de um material proviório a base de óxido de zinco e eugenol. (Revista da Faculdade de Odontologia. Universidade de Passo Fundo)

ISSN Evaluation of the methods used for impression making for different implant systems in prosthetic dentistry. (Ciência Odontológica Brasileira)

doi ISSN Fatigue Resistance of the Bond of a Glass-infiltrated Alumina Ceramic to Human Dentin (Journal of Adhesive Dentistry)

doi ISSN Influence of the ceramic surface conditioning and the resin cements on microtensile bond strengths to a glass ceramic. (Journal of Prosthetic Dentistry)

ISSN Influência de restaurações provisórias de óxido de zinco e eugenol na microinfiltração marginal, empregando diferentes sistemas adesivos. (3448) (Jornal Brasileiro de Clínica Odontológica Integrada)

doi ISSN Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning. (Dental Materials)

doi ISSN Microtensile Bond Strength Between a Quartz Fiber Post and a Resin Cement: Effect of Post Surface Conditioning (Journal of Adhesive Dentistry)

ISSN Pinos de fibras: O estado da arte. (JBD. Revista Ibero-Americana de Odontologia Estética & Dentística)

ISSN Pinos pré-fabricados intra-radiculares: revisão de literatura. (3433) (Jornal Brasileiro de Clínica Odontológica Integrada)

doi ISSN Polishing methods of an alumina reinforced feldspar ceramic. (Brazilian Dental Journal)

ISSN Prótese adesiva em resina composta reforçada por fibra: relato de caso clínico. (Clínica. International Journal of Brazilian Dentistry)

ISSN Repair bond strength of a resin composite to alumina reinforced feldspathic-ceramic. (The International Journal of Prosthodontics)

ISSN Rugosidade superficial de resinas acrílicas indicadas para restaurações temporárias. (PCL. Revista Brasileira de Prótese Clínica & Laboratorial)

ISSN Surface roughness of glazed feldspar-, alumina-, zirconium-based ceramics. (Ciência Odontológica Brasileira)

doi ISSN Bonding to densely sintered alumina- and glass-infiltrated aluminum / zirconium-based ceramics. (Journal of Applied Oral Science)

ISSN Efeito do tempo de condicionamento da superfície cerâmica sobre a resistência adesiva entre uma cerâmica de fluorapatita e um cimento resinoso. (Ciência Odontológica Brasileira)

ISSN Effect of surface treatments on the resin bond to zirconium-based ceramic. (The International Journal of Prosthodontics)

ISSN Effeto dei trattamenti superficiali sul legame tra la resina e la ceramica a base di zirconio (Revista do IEEE América Latina)

doi ISSN Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts. (Journal of Endodontics)

ISSN Evaluation of the tensile bond strength between an aluminous ceramic and two resin cements using the microtensile bond strength test. (Ciência Odontológica Brasileira)

Fiber posts cemented with adhesive systems: a minimally invasive and aesthetic alternative. (Endodontic Therapy)

ISSN Infraestructura cerámica para pilar ceraone personalizada por el sistema Procera. (Gaceta Dental)

ISSN Microtensile bond strength of light- and self-cured adhesive systems to intraradicular dentin using a translucent fiber post. (Operative Dentistry)

ISSN Periimplantite: uma abordagem terapêutica. (Jornal Brasileiro de Clínica Odontológica Integrada)

ISSN Resistência à microtração entre uma cerâmica hidrotérmica e um cimento resinoso, submetidos ou não à ciclagem térmica. (JBD. Revista Ibero-Americana de Odontologia Estética & Dentística)

doi ISSN The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic. (The Journal of Prosthetic Dentistry (Print))

doi ISSN The Effect of Adhesive Systems on the Pullout Strength of a Fiberglass-reinforced Composite Post System in Bovine Teeth (Journal of Adhesive Dentistry)

doi ISSN The influence of different screw tightening forces in the vertical misfit of implant-supported frameworks. (Journal of Applied Oral Science)

ISSN Caracterização de resina composta direta em dentes posteriores. (JBD. Jornal Brasileiro de Dentística & Estética)

ISSN Efeito da ciclagem térmica na adesão entre uma cerâmica de di-silicato de lítio e um cimento resinoso (JBC. Jornal Brasileiro de Clínica & Estética em Odontologia)

doi ISSN Effect of Ceramic Surface Treatment on the Microtensile Bond Strength Between a Resin Cement and an Alumina-based Ceramic (Journal of Adhesive Dentistry)

ISSN Estudo da rugosidade superficial de três resinas acrílicas para restaurações provisórias. (Odonto (São Bernardo do Campo))

ISSN Pinos de fibras: solução para evitar a fratura radicular? (Revista Gaúcha de Odontologia)

ISSN Rugosidade de superfície, dureza Vickers e resistência à flexão de resinas acrílicas quimicamente ativadas utilizadas em coroas temporárias. (PCL. Revista Brasileira de Prótese Clínica & Laboratorial)

ISSN Avaliação da resistência adesiva entre uma cerâmica aluminizada e um cimento resinoso submetidos à ciclagem térmica. (Ciência Odontológica Brasileira)

ISSN Avaliação da resistência à microtração entre uma cerâmica prensada e dois cimentos resinosos (PCL. Revista Brasileira de Prótese Clínica & Laboratorial)

doi ISSN Efeito do tratamento de superfície de uma cerâmica aluminizada infiltrada de vidro sobre a resistência a microtração. (Journal of Applied Oral Science)

doi ISSN Effect of the thermocycling on bond strength of glass infiltrated alumina ceramic and resin luting cement. (Journal of Applied Oral Science)

ISSN Implantes odontológicos sob carga imediata: uma nova proposta. (Odonto (São Bernardo do Campo))

ISSN Pinos intraradiculares pré-fabricados: estudo da radiopacidade usando sistema digital. (Revista Brasileira de Odontologia)

ISSN Resistência à fratura de pré-molares humanos restaurados por diferentes materiais adesivos. (Ciência Odontológica Brasileira)

ISSN Resistência à microtração entre dois cimentos resinosos e uma cerâmica vítrea de di-silicato de lítio. (Odonto (São Bernardo do Campo))

ISSN Resistência à microtração entre uma cerâmica hidrotérmica, silanizada ou não, aderida á uma resina composta por um cimento resinoso. (Ciência Odontológica Brasileira)

ISSN Avaliação da capacidade de impermeabilização do cianoacrilato e do adesivo dentinário autocondicionante em canais obturados e preparados para retentor intra-radicular. (Ciência Odontológica Brasileira)

ISSN Effect of the thermocycling on bond strenght of a glass infiltrated alumina ceramic and a resin luting cement (Revista FOB (USP))

ISSN Reforço da estrutura dental restaurada com amálgama adesivo intracoronário e incrustação metálica fundida. (Jornal Brasileiro de Clínica Odontológica Integrada)

ISSN Transmucoso personalizado pelo sistema Procera - tecnologia CAD/CAM. (PCL. Revista Brasileira de Prótese Clínica & Laboratorial)

Resinas compuestas condensables: una nueva opción restauradora. (Mundo Odontológico)

ISSN Cimentação adesiva de pinos cerâmicos: Avaliação do efeito da ciclagem mecânica. (Pb 196) (Pesquisa Odontológica Brasileira)

ISSN Efeito da espessura do cimento resinoso sobre a adesão entre um pino de fibra de quartzo e dentina intra-radicular. (Ib 132) (Pesquisa Odontológica Brasileira)

ISSN Efeito da fotoativação através de um pino translúcido sobre a microdureza regional de um cimento resinoso dual. (Ia 138) (Pesquisa Odontológica Brasileira)

ISSN Efeitos do tipo de sistema adesivo e região do dente sobre a resistência adesiva à dentina. (Ia 098) (Pesquisa Odontológica Brasileira)

ISSN Effect of storage conditions on bonding to silica-coated zirconium-alumina ceramic. (Abstract 1683) (Journal of Dental Research)

ISSN Effect of various chairside surface-conditioning methods for ceramic repair. (Abstract 0548) (Journal of Dental Research)

ISSN Resistência adesiva a uma cerâmica feldspática: efeito do tempo de condicionamento e da limpeza em ultra-som. (Pb 187) (Pesquisa Odontológica Brasileira)

ISSN Resistência adesiva entre um cimento resinoso e uma cerâmica feldspática: efeito do condicionamento ácido da cerâmica. (Ic 097) (Pesquisa Odontológica Brasileira)

ISSN Adaptação de cilindros fundidos em ligas metálicas não preciosas à pilares protéticos implanto-suportados: estudo in vitro. (Pb 331) (Pesquisa Odontológica Brasileira)

ISSN Bonding to densely sintered high-purity alumina ceramic. (abstract 3185) (Journal of Dental Research)

ISSN Microtração de pinos de fibras em diferentes regiões da dentina, utilizando adesivos químico e foto-ativado. (Pc 183) (Pesquisa Odontológica Brasileira)

ISSN Avaliação da rugosidade de resinas compostas diretas e indiretas. (Pesquisa Odontológica Brasileira)

ISSN Efeito da configuração da cavidade em preparos classe II na microinfiltração sob restaurações de resina composta. (Pesquisa Odontológica Brasileira)

doi Adhesion to Glass¿Ceramics: Concepts and Clinical Implications (Esthetic Oral Rehabilitation with Veneers)

doi New Materials for CAD/CAM Systems: Resin-Based Composites, Polymer-Infiltrated Ceramic Network, Zirconia-Reinforced Lithium Silicate, and High Translucent Zirconia (Esthetic Oral Rehabilitation with Veneers)

Cimentação adesiva: cndicionamento da superfîcie cerâmica (Congresso Internacional de Odontologia do Centenário)

Prótese Metal-Free: Tratamento da superfície cerâmica pré-cimentação. (Atualização clínica em Odontologia.)

Tratamento Reabilitador Protético Integrado. (Odontologia Integrada)

Percepção - Estética em Próteses Livres de Metal em Dentes Naturais e Implantes.

Caracterização de cerâmicas à base de alumina e zircônia para aplicações odontológicas (48o Congresso Brasileiro de Cerâmica)

Estudo da resistência adesiva entre um cimento resinoso e três sistemas cerâmicos odontológicos: efeito do tratamento da superfície cerâmica. (48o Congresso Brasileiro de Cerâmica)

Adhesion and strength properties of air-abraded Y-TZP:Distinct silica-coating concentrations. (DOI: https://doi.org/10.1016/j.dental.2018.08.205) (Academy of Dental Materials)

Cyclic load-to-failure of hydrofluoric acid etched lithium disilicate restorations. (DOI: https://doi.org/10.1016/j.dental.2018.08.195) (Academy of Dental Materials)

Does hydrofluoric acid concentration influence fatigue of feldspathic restorations? (DOI: https://doi.org/10.1016/j.dental.2018.08.034) (Academy of Dental Materials)

Fatigue characterization of yttrium-stabilized zirconia materials for monolithic restorations. (DOI: https://doi.org/10.1016/j.dental.2018.08.269) (Academy of Dental Materials)

Fatigue of lithium-disilicate crowns: Processing technique and surface treatment effects. (DOI: https://doi.org/10.1016/j.dental.2018.08.202) (Academy of Dental Materials)

Fatigue resistance of fiber reinforced polymer. (DOI: https://doi.org/10.1016/j.dental.2018.08.265) (Academy of Dental Materials)

Fatigue-failure-load of lithium-disilicate crowns etched by hydrofluoric acid concentrations (47th Annual Meeting & Exhibition of the AADR)

Translucent zirconia:Mechanical reliability, fatigue strength, survival and phase analysis. (DOI: https://doi.org/10.1016/j.dental.2018.08.074) (Academy of Dental Materials)

Wear of zirconium-reinforced lithium silicate ceramic against several restorative materials (DOI: https://doi.org/10.1016/j.dental.2018.08.008) (Academy of Dental Materials)

ANÁLISE DO DANO E DA INFILTRAÇÃO DE VIDRO NO LIMITE DE FADIGA DE PRÓTESES FIXAS EM ZIRCÔNIA MONOLÍTICA (516) (52 Encontro do Grupo Brasileiro de Materiais Dentários)

COMPORTAMENTO MECÂNICO DE UMA CERÂMICA Y-TZP APÓS DIFERENTES PROTOCOLOS DE ENVELHECIMENTO. (490) (52 Encontro do Grupo Brasileiro de Materiais Dentários)

DEGRADAÇÃO A BAIXAS TEMPERATURAS DE CERÂMICA Y-TZP: REVISÃO SISTEMÁTICA E META-ANÁLISE. (470) (52 Encontro do Grupo Brasileiro de Materiais Dentários)

DOES ETCHING WITH DIFFERENT HYDROFLUORIC ACID CONCENTRATIONS INFLUENCE THE FATIGUE LIMIT OF FELDSPATHIC CERAMIC CROWNS? (616) (52 Encontro do Grupo Brasileiro de Materiais Dentários)

EFEITOS DE DIFERENTES TRATAMENTOS DA SUPERFÍCIE INTERNA DE COROAS EM Y-TZP NA RESISTÊNCIA À TRAÇÃO (643) (52 Encontro do Grupo Brasileiro de Materiais Dentários)

Fatigue limit of monolithic zirconia FDP: Damage and glass infiltration (Academy of Dental Materials)

IMPACTO DA USINAGEM CAD-CAM NO COMPORTAMENTO À FADIGA DE CERÂMICAS COM DIFERENTES MICROESTRUTURAS (473) (52 Encontro do Grupo Brasileiro de Materiais Dentários)

INFLUÊNCIA DO REMANESCENTE CORONÁRIO NO COMPORTAMENTO BIOMECÂNICO DE DENTES TRATADOS ENDODONTICAMENTE (493) (52 Encontro do Grupo Brasileiro de Materiais Dentários)

Ácido fluorídrico e seu efeito na resistência flexural de uma cerâmica de dissilicato de lítio (51 Encontro do Grupo Brasileiro de Materiais Dentários)

Can cementation strategy influence the fatigue resistance of zirconia crowns? (Academy of Dental Materials)

Comportamento mecânico de uma cerâmica à base de zircônia após desgaste e envelhecimento em autoclave (51 Encontro do Grupo Brasileiro de Materiais Dentários)

Diferentes concentrações de ácido fluorídrico: efeito na resistência de união ao dissilicato de lítio (51 Encontro do Grupo Brasileiro de Materiais Dentários)

Efeito do jateamento com alumina e diferentes sistemas primer/adesivo na adesão a zircônia (51 Encontro do Grupo Brasileiro de Materiais Dentários)

Influência de soluções irrigadoras na adesão ao esmalte e à dentina de dois sistemas adesivos (51)

Jateamento com partículas de cerâmica vítrea: nova abordagem adesiva entre cimento resinoso e cerâmica Y-TZP (51 Encontro do Grupo Brasileiro de Materiais Dentários)

União entre as cerâmicas de um sistema livre de metal (51 Encontro do Grupo Brasileiro de Materiais Dentários)

Biomechanical behavior of anterior teeth restored with ceramic veneers (Academy of Dental Materials)

Bond strength of a resin cement to y-tzp and phase transformation after different sandblasting rocatec parameters. (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Bond strength of a resin cement to Y-TZP and phase transformation after different sandblasting parameters. (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Different concentrations of hydrofluoric acid: effect on the contact angle and resin bond strength durability to a feldspathic ceramic (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Different concentrations of hydrofluoric acid: impact on the roughness and flexural strength of a feldspathic ceramic (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Different types of surface treatment on the bond between y-tzp and veneering porcelain (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Effect of cement removal technique on morphology at tooth-ceramic margin (Academy of Dental Materials)

Effect of different surface treatments on resin-bonding to hybrid material (Academy of Dental Materials)

Evaluation of the shear strength of orthodontic brackets bonded to indirect resin surface (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Fatigue resistance of monolithic and layered zirconia and LiSi2 crowns (Academy of Dental Materials)

Fatigue resistance of Y-TZP/porcelain crowns (Academy of Dental Materials)

Hard machining, glaze firing and hydrofluoric acid etching: do these procedures affect the flexural strength of a leucite glass-ceramic? (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Hydrofluoric acid concentration effect on resin adhesion to feldspathic ceramic (Academy of Dental Materials)

Inlays made of a hybrid material: Adaptation and bond strengths (Academy of Dental Materials)

Low-temperature degradation effect on the mechanical behavior of ground Y-TZP (Academy of Dental Materials)

Preliminary results of the survival and fracture load of roots restored with intracanal posts: weakened vs nonweakened roots (50 Encontro do Grupo Brasileiro de Materiais Dentários)

Roughness and microstructural changes in Y-TZP laser treated before sintering (Academy of Dental Materials)

Slow crack growth behavior of two porcelain-zirconia systems (Academy of Dental Materials)

Survival and fracture of intracanal posts: weakened vs nonweakened roots (Academy of Dental Materials)

Adhesion to Zirconia: study of films deposition based on silica in the YTZ-P surface (041) (49 Encontro do Grupo Brasileiro de Materiais Dentários)

Bond strength and contact angle of feldspathic ceramic subjected to different conditioning methods (067) (49 Encontro do Grupo Brasileiro de Materiais Dentários)

Bond strength between overglazed zirconia and resin cement: Influence of the etching protocol (Academy of Dental Materials)

Bond strength of the zirconia ceramic/resin cement: Influence of an alternative surface treatment (Academy of Dental Materials)

Ceramic-inlays: effect of mechanical cycling and ceramic type on restoration-dentin adhesion (S1658) (91st General Session & Exhibition of the IADR)

Characterization of a full-contour zirconia and glaze application strategy. (S0042) (91st General Session & Exhibition of the IADR)

Crowns based on Y-TZP: Evaluation of different strategies for cementing (Academy of Dental Materials)

Differents Mechanical Tests to Evaluate Bond-Strength on Y-TZP (147) (49 Encontro do Grupo Brasileiro de Materiais Dentários)

Effect of cooling protocol on biaxial flexural strength and failure behavior of a bilayer ceramic system (086) (49 Encontro do Grupo Brasileiro de Materiais Dentários)

Effect of grinding with resin-bonded diamond discs and diamond burs on the mechanical behavior of Y-TZP ceramics (046) (49 Encontro do Grupo Brasileiro de Materiais Dentários)

Fatigue limit of Y-Tzp ceramic after surface treatments (Academy of Dental Materials)

Fracture load, mechanical fatigue and finite element analysis of glass fiber posts (056) (49 Encontro do Grupo Brasileiro de Materiais Dentários)

Monolithic vs. Layered zirconia crowns: the boll-mill fatigue testing approach. (S1898) (91st General Session & Exhibition of the IADR)

New approach for surface modification of Y-TZP ceramics: marginal fit of frameworks (91st General Session & Exhibition of the IADR)

Pilot study on morphology at tooth-ceramic margin: Effect of cement excess removal method (Academy of Dental Materials)

Surface treatment of Y-TZP with overglaze: effect of fracture resistance. (S2401) (91st General Session & Exhibition of the IADR)

Survival rate, load to fracture and FEA of anterior teeth restored with laminate veneer varyng the design prepare (081) (49 Encontro do Grupo Brasileiro de Materiais Dentários Encontro do Grupo Brasileiro de Materiais Dentários)

Translucency of layered vs. lithium disilicate crowns. (S3092) (91st General Session & Exhibition of the IADR)

YTZP crowns retention varying the substrate, surface treatment and cement (217) (49 Encontro do Grupo Brasileiro de Materiais Dentários)

Canal Root Obturation: Fracture Strength of FRC-restored roots and FEA. (abstract # 2051) (90th General Session and Exhibtion of the IADR)

Different Mechanical Tests to Evaluate Bond Strength on Y-TZP (abstract # 1334) (90th General Session and Exhibtion of the IADR)

Effect of Cementation Strategy on Feldspathic Inlays Bond Resistance (abstract # 1020) (90th General Session and Exhibtion of the IADR)

Effect of Mechanical Cycling Frequency on Fiber-Post/Dentin Adhesion (abstract # 1006) (90th General Session and Exhibtion of the IADR)

Effect Of The Ceramic-Composition And Manufacturing-Process On Resin Cement-Ceramic MTBS (abstract # 1329) (90th General Session and Exhibtion of the IADR)

Flexure And Shear Stress Of Radiopaque Fiber Posts (abstract 1416) (90th General Session and Exhibtion of the IADR)

Fracture Resistance of Weakened Roots or not, after Mechanical Cycling (abstract # 2759) (90th General Session and Exhibtion of the IADR)

Fracture-strength and FEA of glass-fiber-posts with different diameters (abstact # 1712) (90th General Session and Exhibtion of the IADR)

FRC-Dentin Adhesion: Effect of Resin-Cements and FRC Surface Conditioning (abstract # 1332) (90th General Session and Exhibtion of the IADR)

Influence of measurement instrument and operator on dentin-FRC adhesion (abstract # 1669) (90th General Session and Exhibtion of the IADR)

Influence of root canal treatment techniques on fracture resistance (abstract # 2052) (90th General Session and Exhibtion of the IADR)

Layering procedure effect on the strength of a porcelain-zirconia system (abstract # 1371) (90th General Session and Exhibtion of the IADR)

Mechanical Strength Characterization of Y-TZP Ceramics after Surface Treatment (abstract # 1369) (90th General Session and Exhibtion of the IADR)

New approach for surface-modification of Y-TZP ceramics (Part I): YTZP-adhesion (abstract # 1678) (90th General Session and Exhibtion of the IADR)

New surface treatment of Y-TZP: Effect on fracture resistance (Academy of Dental Materials Annual Meeting)

Porcelain-Dentin Adhesion: Effect of Mechanical-cycling and Luting Protocols (abstract # 2000) (90th General Session and Exhibtion of the IADR)

Push-out Tests to Evaluate Bond Strength on Y-TZP (abstract # 1338) (90th General Session and Exhibtion of the IADR)

Retention of YTZP crowns: Evaluation of different strategies for cementation (Academy of Dental Materials Annual Meeting)

Salicylate resin-based sealer: effects on the adhesiveness of fiber posts (abstract # 1021) (90th General Session and Exhibtion of the IADR)

YTZP-dentin bond: evaluation of YTZP- and dentin-conditioning, and bond-durability (abstract # 3199) (90th General Session and Exhibtion of the IADR)

doi Application mode influence on mechanical behavior of bilayer ceramic specimens (Annual meeting of the Academy of dental Materials)

doi Effect of canal root obturation on fracture strength of roots (Annual meeting of the Academy of dental Materials)

doi Effect of cycle frequency of mechanical fatigue on bond strength (Annual meeting of the Academy of dental Materials)

doi FEA, fracture and fatigue resistance of different fiber posts (Annual meeting of the Academy of dental Materials)

doi Microstructural changes and roughness of laser treated Y-TZP before sintering (Annual meeting of the Academy of dental Materials)

Adhesion between zirconia and luting cements: Effect of surface treatments (Academy of Dental Materials Annual Meeting)

Adhesive durability of phosphate monomer resin cement to Y-TZP ceramic (Academy of Dental Materials Annual Meeting)

Biaxial flexural strength and structural stability of a Y-TZP ceramic (abstract # S0665) (88th General Session and Exhibtion of the IADR)

Bond strength durability of resin cements to Y-TZP ceramic (Academy of Dental Materials Annual Meeting)

Cementation strategy and mechanical-cycling effects on human-dentin and composite-inlays MTBS (Academy of Dental Materials Annual Meeting)

Condicionamento da superfície de pinos de fibra: influência na resistência adesiva após ciclagem mecânica. (resumo PNf 221) (27a Reuniao Anual da SBPqO)

Does the disk-specimen height impact the push-out bond strength results? (Academy of Dental Materials Annual Meeting)

Efeito da ciclagem mecânica e de diferentes estratégias de cimentação na união entre pino de fibra e dentina intrarradicular. (resumo PNf 217) (27a Reuniao Anual da SBPqO)

Efeito da técnica de obturação e da ciclagem mecânica na resistência à fratura de raízes. (resumo PNd 174) (27a Reuniao Anual da SBPqO)

Efeito de um cimento resinoso nos parametros de weibull de uma estrutura bilayer cerâmica/cimento resinoso. (resumo PNc 155) (27a Reuniao Anual da SBPqO)

Efeito do preparo do canal radicular, tipo de pino radicular, e ciclagem mecânica na resistência à fratura de raízes. (resumo PNb 160) (27a Reuniao Anual da SBPqO)

Effect of adhesive pH and resin-cement type on ceramic bond. (abstract # S4462) (88th General Session and Exhibtion of the IADR)

Effect of canal obturation on fracture strength of roots (Academy of Dental Materials Annual Meeting)

Effect of ceramic surface conditioning on resin-MTBS durability to leucite ceramic (Academy of Dental Materials Annual Meeting)

Effect of ceramic surface conditioning on resin-MTBS durability to leucite-ceramic. (abstract # 4508) (88th General Session and Exhibtion of the IADR)

Effect of veneer thickness on strength of an all-ceramic system. (abstract # S0649) (88th General Session and Exhibtion of the IADR)

Estratégia de cimentação e fadiga mecânica na resistência de união entre inlays de resina composta indireta e dentina. (resumo Pla 133) (27a Reuniao Anual da SBPqO)

Estudo piloto da modificação do tratamento de superfície da YTZP: Análise da resistência adesiva. (resumo PNd 223) (27a Reuniao Anual da SBPqO)

Influência do número de queimas no comportamento mecânico de espécimes cerâmicos bilaminados. (PNf 231) (27a Reuniao Anual da SBPqO)

Instrumentation, post and mechanical cycling effects on fracture strength on roots (Academy of Dental Materials Annual Meeting)

Interaction between silicatization and MDP monomer on bonding to YTZP. (abstract # S1317) (88th General Session and Exhibtion of the IADR)

Microstructural changes on sandblasting Y-TZP before and after sintering (Academy of Dental Materials Annual Meeting)

Non-axial loading of crowns supported by a new fiber post systems. (abstract # S2195) (88th General Session and Exhibtion of the IADR)

Resin-bond to Root Dentin: Effect of adhesive systems. (Abstract # S3942) (88th General Session and Exhibtion of the IADR)

Resistência a Flexão de pinos de fibra de vidro após diferentes métodos de condicionamento de superfície de pinos. (resumo Pla 089) (27a Reuniao Anual da SBPqO)

Resistência à fratura de pinos de fibra de vidro com diferentes diâmetros na porção coronária. (resumo Plf 096) (27a Reuniao Anual da SBPqO)

Resistência de união de pinos cimentados adesivamente à dentina intrarradicular: influência de diferentes sistemas adesivos. (resumo Plb 085) (27a Reuniao Anual da SBPqO)

Roughness and topographical evaluations of a glassy-matrix ceramic using AFM. (abstract # S3995) (88th General Session and Exhibtion of the IADR)

Self-adhesive and conventional cements: bond strength to YTZP. (abstract # 0671) (88th General Session and Exhibtion of the IADR)

Tensão de polimerização de cimentos resinosos utilizando diferentes fontes de fotoativação. (resumo Pld 093) (27a Reuniao Anual da SBPqO)

Tissue loss during post removal: a new post concept evaluation. (abstract # 0772) (88th General Session and Exhibtion of the IADR)

µTBS of resin cements to lithium-disilicate-dentin complexes. (Abstract # 1838) (87th General Session and Exhibtion of the IADR)

µTBS to Non-etched/Etched Feldspar-ceramic: Self-adhesive vs Conventional Resin Cements. (Abstract # 524) (87th General Session and Exhibtion of the IADR)

Adhesion of Self-etch and Conventional Resin Cements to Y-TZP Ceramic. (Abstract 3147) (87th General Session and Exhibtion of the IADR)

Avaliação da resistência de união de pinos de fibra de vidro. Efeito de diferentes sistemas adesivos. (PIc 098) (26a Reuniao Anual da SBPqO)

Conditioning-method effect on contact-angle, pH, adhesion of resin-cement to glass-ceramic. (Abstract # 517) (87th General Session and Exhibtion of the IADR)

Coronal Macro-retentions and Diameter of Glass-FRC: Fracture-Resistance evaluation of Bovine-Teeth. (Abstract # 443) (87th General Session and Exhibtion of the IADR)

Durabilidade da adesão de um cimento resinoso a uma cerâmica a base de óxido de zircônio. (PIc 081) (26a Reuniao Anual da SBPqO)

Durabilidade da resistência de união de cimentos resinosos à cerâmica Y-TZP (PNf 187) (26a Reuniao Anual da SBPqO)

Efeito da ciclagem mecânica na união entre pino de fibra e dentina: avaliação de duas estratégias de cimentação. (PNe 136) (26a Reuniao Anual da SBPqO)

Efeito da deposição de partículas utilizando três jateadores com diferentes design. (PNf 204) (26a Reuniao Anual da SBPqO)

Fiber Post Removal: Comparative Study Using a New Post Concept. (Abstract # 183) (87th General Session and Exhibtion of the IADR)

In situ biofilm formation on glass-ceramic: finishing and polishing effect. (Abstract # 3162) (87th General Session and Exhibtion of the IADR)

Influência da espessura de cimento e da ciclagem mecânica na união entre pino de fibra e dentina intrarradicular. (PNf 192) (26a Reuniao Anual da SBPqO)

Influência do formato e diâmetro do pino na resistência à fratura após fadiga mecânica. (PIc 085) (26a Reuniao Anual da SBPqO)

Influência do jateamento na resistência à flexão de uma cerâmica de itrio-zircônio: efeito da pressão e do tipo de partícula. (PNF 187) (26a Reuniao Anual da SBPqO)

Pullout Strength of Fiber Post: Evaluation of Different Luting Cements (Abstract # 964) (87th General Session and Exhibtion of the IADR)

Resistência a fratura, após ciclagem mecânica, de raízes reconstruídas com diferentes estratégias. (26a Reuniao Anual da SBPqO)

Resistência adesiva entre um pinos de fibra e dentina intrarradicular, em função do condicionamento da superfície dos pinos. (PIf 083) (26a Reuniao Anual da SBPqO)

Resistência adesiva entre um pinos de fibra e dentina intrarradicular: influência da espessura dos espécimes para push-out. (PNe 147) (26a Reuniao Anual da SBPqO)

Resistência à fratura de dentes bovinos restaurados com pinos de fibra: avaliação do diâmetro e macro-retenções. (PId 121) (26a Reuniao Anual da SBPqO)

Resistência à microtração de cimentos resinosos ao conjunto cerâmica a base de dissilicato de litio + dentina. (PNf 123) (26a Reuniao Anual da SBPqO)

Resistência de união de diferentes cimentos resinosos e ionomerico entre pinos de fibra e dentina intra-radicular. (PIa 086) (26a Reuniao Anual da SBPqO)

Resistência de união entre um pino de fibra e dentina intrarradicular, em função da estratégia de cimentação. (PId 123) (26a Reuniao Anual da SBPqO)

Retention of quartz fiber posts using different luting cements. (Abstract # 976) (87th General Session and Exhibtion of the IADR)

Adesão de um cimento resinoso a uma cerâmica feldspática: avaliação da resistência adesiva, ângulo de contato e pH, em função de diferentes técnicas de condicionamento. (PAb 310) (25a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Biofilm architecture on feldspar ceramic by confocal laser scanning microscopy. (Abstract # 0451) (86th General Session and Exhibtion of the IADR)

Bond to dentin-glass ceramic: effects of neutralization and mechanical cycling. (Abstract # 2311) (86th General Session and Exhibtion of the IADR)

Cement insertion technique effect on layer cement of fiber post. (Abstract # 1746) (86th General Session and Exhibtion of the IADR)

Durabilidade da resistência adesiva entre uma cerâmica feldspática e cimento resinoso: efeito do tipo de adesivo e do cimento resinoso. (PAb 212) (25a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito da estratégia de cimentação na resistência à tração de um pino de fibra: cimentação adesiva vs não-adesiva. (PIe 178) (25a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito do acabamento e polimento na rugosidade superficial, hidrofobicidade e topografia de uma cerâmica feldspática. (PAa 323) (25a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito do jateamento na resistência à flexão de uma cerâmica de ítrio-zircônia. (PAc 314) (25a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Effect of air-particle abrasion on cyclic and flexural strangth of zirconia. (Abstract # 3147) (86th General Session and Exhibtion of the IADR)

Effect of pressure on ceramic-ceramic adhesion in microtensile bond tests. (Abstract # 0418) (86th General Session and Exhibtion of the IADR)

Fadigue-resistance of teeth restored with FRC: effects of luting cements. (Abstract # 3093) (86th General Session and Exhibtion of the IADR)

Fracture resistance of bovine teeth restored with glass fiber posts. (Abstract # 3202) (86th General Session and Exhibtion of the IADR)

Influence of cement insertion technique on fiber post bond strength. (Abstract # 1745) (86th General Session and Exhibtion of the IADR)

Bonding between resin luting cements and a lithium-disilicate ceramic. (Pb275) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Bonding of IPS-Empress-2 with different surface treatments and resin cements. (Abstract 1563) (85th General Session and Exhibtion of the IADR)

Bovine teeth restored with resin bonded fiber post: fatigue resistance. (Abstract 2622) (85th General Session and Exhibtion of the IADR)

Efeito da degradação da superfície de materiais cerâmicos na formação de biofilme: estudo in situ. (Pb364) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito da sequencia de condicionamento na adesão de reparo de uma resina composta e cerâmicas para coroas totalmente estéticas. (Pa238) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito de clareadores sobre a rugosidade superficial de cerâmicas feldspáticas. (Pc221) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito de diferentes agentes cimentantes sobre a resistência à fadiga de dentes restaurados com pinos de fibra. (Ia203) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Effect of Fiber Post Emerging Diameter on Composite Core Stabilization. (Abstract 2623) (85th General Session and Exhibtion of the IADR)

Effect of irrigation solutions on bovine intraradicular dentine bond strength. (Abstract 2642) (85th General Session and Exhibtion of the IADR)

Estudo das restaurações estéticas indiretas intracoronárias sobre a deflexão de cúspide de pré-molares: estudo com "strain-gauge". (Pc366) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Evaluation of Flexural Strength of Quartz and Glass Fiber Posts. (Abstract 2620) (85th General Session and Exhibtion of the IADR)

Fatigue resistance of teeth with fiber post: effect of length cementation. (Abstract 2618) (85th General Session and Exhibtion of the IADR)

How Efficient are Chairside Conditioning Methods for Repair of All-ceramics? (Abstract 1567) (85th General Session and Exhibtion of the IADR)

Influência da aplicação do adesivo na durabilidade da união entre uma cerâmica feldspática e um cimento resinoso. (Pa363) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Influência da contaminação salivar na resistência adesiva de cerâmica tratada com Rocatec. (Pa259) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Microtensile Bond Strength of Resin Cements to a Lithium-disilicate Ceramic. (Abstract 0869) (85th General Session and Exhibtion of the IADR)

Preliminary results of early bacterial colonization on feldspar-ceramics: SEM-analysis. (Abstract 0877) (85th General Session and Exhibtion of the IADR)

Resin-bond to Root Dentin: Effect of the Microbrush and Paper-point. (Abstract 1996) (85th General Session and Exhibtion of the IADR)

Resistência adesiva à dentina humana: efeito da pré-hibridização ou da aplicação de dessensibilizante.. (Ic210) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

SEM-analysis of the early bacterial colonization on feldspar-ceramics: a pilot-study. (Abstract 0832) (85th General Session and Exhibtion of the IADR)

Sistemas de acabamento e polimento em cerâmica feldspática reforçada por leucita: anaálise da rugosidade e topografia superficial. (PB341) (24a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Adesão de uma cimento resinoso a uma cerâmica feldspática: efeito da silanização, do envelhecimento e do condicionador. (Pa 335) (23a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Bond strength comparisons between human and bovine dentin. (Abstract 83) (Academy of Dental Materials)

Bond strength durability between resin cement and yttria-stabilized zirconia ceramic. (Abstract 135) (Academy of Dental Materials)

Bond strengths of a self-etching resin cement to dentin. (Abstract 137) (Academy of Dental Materials)

Bonding area size: effect on bonding to a glass ceramic. (Abstract 70) (Academy of Dental Materials)

Bonding of simplified adhesives to bovine root dentin. (Abstract 0039) (84th General Session and Exhibtion of the IADR)

Correlação entre rugosidade superficial e aderência in vitro de Streptococcus mutans em cerâmicas e resinas compostas. (Pa 127) (23a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Durabilidade da resistência adesiva entre uma cerâmica de zircônia infiltrada de vidro e um cimento resinoso. (Pc 323) (23a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito da ciclagem mecânica sobre a resistência de união de pinos de fibra cimentados com resina à dentina. (Pc 320) (23a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Effect of conditioning modalities on the repair strength of resin-composite to all-ceramic composite. (Abstract 143) (Academy of Dental Materials)

Influence of impression materials contact angle on stone cast surface. (Abstract 131) (Academy of Dental Materials)

Influência de diferentes aplicadores de adesivo na resistência de união à dentina intra-radicular. (Pa 229) (23a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Long-term acrylic resin bond strength to acrylic teeth: surface treatments. (Abstract 0621) (84th General Session and Exhibtion of the IADR)

Mechanical cycling of ceramic and FRC posts bonded to root-dentin. (Abstract 0660) (84th General Session and Exhibtion of the IADR)

Mechanical cycling of FRC resin-bonded to root dentin. (Abstract 0083) (84th General Session and Exhibtion of the IADR)

Push-out strength of simplified adhesive to bovine root dentin. (Abstract 67) (Academy of Dental Materials)

Resin shear bond strength to zirconia ceramic. (Abstract 104) (Academy of Dental Materials)

Resistência à fratura de remanescente dentais de diferentes alturas restauradoras com ou sem pinos intra-radiculares. (Pc 328) (23a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

SEM observations of adhesion to root canals with three adhesives. (Abstract 0049) (84th General Session and Exhibtion of the IADR)

Surface conditioning of a Y-TZP ceramic: effect on MTBS. (Abstract 2087) (84th General Session and Exhibtion of the IADR)

Topographic evaluation after silicatization of the ceramic surface using different sanblasting equipaments. (abstract 102) (Academy of Dental Materials)

Translucency of ZrO2 copings for all-ceramic FPDs. (Abstract 103) (Academy of Dental Materials)

A silanização aumenta a adesão de um cimento resinoso a uma cerâmica feldspática? (Ia 088) (22a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Adesão a uma cerâmica a base de alumina-zircônio: Microtração Vs cisalhamento. (Pa 190) (22a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Bonding to glass-infiltrated zirconium-based ceramic: the effect of surface treatment. (Abstract 1684) (83rd General Session & Exhibition of the IADR)

Does etching time and ultrasonic cleaning effect resin-ceramic bond? (Abstract 1719) (83rd General Session & Exhibition of the IADR)

Durabilidade da adesão de um cimento resinoso a uma cerâmica experimental de zircônio estabilizada com óxido de ítrio. (Ib 105) (22a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Bond strength between a resin cement and two ceramic systems: effect of ceramic surface treattment (Abstract 21). (40o Encontro do Grupo Brasileiro de Materiais Dentarios)

Bonding to intra-canal dentin: human dentin vs bovine dentin. (abstract 1765) (82nd General Session & Exhibition of the IADR)

Comparison of microhardness of composite resin with or without the superficial layer (Mylar matriz). (Abstract 18). (40o Encontro do Grupo Brasileiro de Materiais Dentarios)

Estudo da flexibilidade de pinos de fibra de vidro com cimento resinoso. (Pa 198) (21a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Flexural strength of fiber posts: effect of the silica sandblasting. (abstract 3309) (82nd General Session & Exhibition of the IADR)

Microtensile bond strength beween ceramic and a composite resin. (abstract 3139) (82nd General Session & Exhibition of the IADR)

Microtração entre adesivos fotopolimerizáveis com resinas compostas química e fotoativadas. (Ic 110) (21a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência adesiva entre um cimento resinoso e um pino de fibra de vidro submetido a diferentes tratamentos. (Ib131) (21a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência adesiva entre um cimento resinoso e uma cerâmica aluminizada infiltrada por vidro. (Ib 090) (21a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência adesiva entre uma cerâmica de fluorapatita e um cimento resinoso: efeito do tempo de condicionamento ácido. (Ic 099) (21a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência adesiva entre uma cerâmica feldspática reforçada por leucita e dois cimentos resinosos. (Pa 268) (21a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência de união entre resina e dentina associando cimentos resinosos a diferentes sistemas adesivos. (Ib 087) (21a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Alteração dimensional in vitro de um silicone de condensação em função de técnicas de impressão. (Pa 213) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Avaliação da resistência à flexão de pinos intra-radiculares de fibra de carbono, fibra de quartzo e fibra de vidro. (Pa 276) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Efeito da neutralização do ácido fluorídrico na resistência adesiva entre um cimento resinoso e uma cerâmica prensada. (Pb 161) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Evaluation of the effect of finishing and polishing systems on the ceramic surface roughness. (Abstract 0962) (81st General Session & Exhibition of the IADR)

Evaluation of the flexural strength of carbon fiber- and quartz fiber-based posts. (Abstract 2673) (81st General Session & Exhibition of the IADR)

Evaluation of the microtensile bond strength among two resin cements and a glass-infiltrated alumina ceramic. (Abstract 2606) (81st General Session & Exhibition of the IADR)

Evaluation of the surface roughness of certain resin acrylics for temporary crowns. (Abstract 1515) (81st General Session & Exhibition of the IADR)

Flexural strength of resins used for temporary crowns. (Abstract 1516) (81st General Session & Exhibition of the IADR)

Influence of the thermo-cycling on the microtensile bond strength between a lithium disilicate-based ceramic and a composite for repair. (Abstract 2605) (81st General Session & Exhibition of the IADR)

Microtensile bond strength between a composite resin and an alumina ceramic: effect of intra-oral porcelain repair system. (Abstract 2588) (81st General Session & Exhibition of the IADR)

Microtensile bond strength between quartz fiber post and resin cement: effect of post surface treatment. (Abstract 2672) (81st General Session & Exhibition of the IADR)

Microtensile bond strength between zirconia ceramic and resin cement: effect of ceramic surface treatment. (Abstract 2908) (81st General Session & Exhibition of the IADR)

Pinos estéticos intra-radiculares pré-fabricados:correlação dos níveis de cinza por meio de imagens digitais. (Ia 167) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à flexão de resinas compostas variando a fonte de fotopolimerização. (Ia 109) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à microtração de um cimento resinoso entre resinas compostas com diferentes tratamentos de superfícies. (Ic 102) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à microtração entre pino de fibra e dentina intra-radicular, com adesivos foto- e quimicamente ativados. (Pc 189) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à microtração entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície. (Pa 206) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à microtração entre um cimento resinoso e uma cerâmica feldspática reforçada com alumina. (Pb 201) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à microtração entre um pino de fibra e um cimento resinoso: efeito do tratamento da superfície do pino. (Pa 205) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à microtração entre uma cerâmica aluminizada para infra-estrutura e dois cimentos resinosos. (Pa 216) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à microtração entre uma cerâmica feldspática reforçada por leucíta e uma resina composta para reparo. (Pa 193) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência â microtração entre um cimento resinoso e três cerâmicas: efeito do tratamento da superfície cerâmica. (H 016) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência de união de cimento resinoso entre dentina e resina composta com diferentes tratamentos de superfície. (Ic 095) (20a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Study of the tensile strength of capsules cemented on metallic die, in function of relief and retention for the cement. (Abstract 2582) (81st General Session & Exhibition of the IADR)

Avaliação da resistência de união (cisalhamento) entre titânio comercialmente puro fundido e usinado a uma cerâmica. (Pb 275) (19a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Estudo comparativo in vitro do acúmulo de placa bacteriana à superfície de materiais estéticos indiretos. (Pb 169) (19a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Evaluation of distorsion of the osseointegration prothesis constroted by different techniques: monobloc and laser welding. (Abstract 2022) (80th General Session & Exhibition of the IADR)

Evaluation of marginal misfit betwwen wax pattern and the cervical marginal of complete crowns. (Abstract 0320) (80th General Session & Exhibition of the IADR)

Microtração de cerâmica aluminizada e cimento resinoso: efeito do tratamento da superfície cerâmica. (Pa 217) (19a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Post systems: compressive strength roots prepared at 2/3 and ½ length restored with post systems. (Abstract 1933) (80th General Session & Exhibition of the IADR)

Resistência à microtração entre dois cimentos resinosos e uma cerâmica vítrea de dissilicato de lítio. (Ib 263) (19a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Fracture strength of bovine pulpless teeth restored by post systems. (Abstract 227) (79th General Session and Exhibition AADR/CADR)

Prehybridization on dentin: Its influence on adhesive strength. (Abstract 222) (79th General Session and Exhibition AADR/CADR)

Flexural resistance of new condensable composite resins. (Abstract A-297) (78th General Session & Exhibition of the IADR)

Fracture resistance of the dental structure restored with inlay adhesive restorations. (Abstract B-222) (78th General Session & Exhibition of the IADR)

Microhardness and flexural strength of condensable composite resins. (Abstract 2397) (78th General Session & Exhibition of the IADR)

Microhardness of condensable composite resins. (Abstract B-300) (78th General Session & Exhibition of the IADR)

Microinfiltração em restaurações oclusais de resina composta fotopolimerizadas pela técnica do pulso atrasado. (14ª Semana Acadêmica de Odontologia)

Microinfiltração em restaurações oclusais de resina composta fotopolimerizadas pela técnica do pulso atrasado. (A 047) (18a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Otimização das restaurações estéticas adesivas em dentes posteriores. (14ª Semana Acadêmica de Odontologia)

Pinos Intracanal Pré-Fabricados - Uma visão crítica da ciência. (14ª Semana Acadêmica de Odontologia)

Resistência à fratura de dentes bovinos despolpados restaurados através de sistemas de pinos pré-fabricados. (B 290) (18a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Resistência à fratura de dentes bovinos despolpados restaurados através de sistemas de Pinos Pré-Fabricados. (14ª Semana Acadêmica de Odontologia)

Surface roughness of condensable and hibrid composite resins. (Abstract 1079) (78th General Session & Exhibition of the IADR)

The influence of inlays adhesive restoration on fracture resistance of dental structure. (Abstract 3154) (78th General Session & Exhibition of the IADR)

Análise da resistência à flexão de 8 resinas compostas condensáveis e 4 híbridas. (XIII Semana Acadêmica de Odontologia)

Análise da rugosidade superficial de sete resinas compostas condensáveis e 4 híbridas. (XIII Semana Acadêmica de Odontologia)

Análise da Resistência à Flexão de 8 resinas compostas condensáveis e 4 híbridas. (A 297) (16a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Avaliação da microdureza de resinas compostas condensáveis. (XXXV Encontro do Grupo Brasileiro de Materiais Dentários)

Avaliação da microdureza de resinas compostas condensáveis. (B 300) (16a Reunião Anual da Sociedade Brasileira de Pesquisa Odontológica)

Avaliação da Microdureza de resinas compostas condensáveis. (XIII Semana Acadêmica de Odontologia)

Diagnóstico e tratamento do Bruxismo em paciente odontopediatra (XIII Semana Acadêmica de Odontologia)

Estética, Resistência e Preservação - Uma nova era: Pino cerâmico, Núcleo de Preenchimento e Coroa Ceramo-cerâmica. Parte I. (XIII Semana Acadêmica de Odontologia)

Otimização e precisão da moldagem em Prótese Parcial Fixa: Técnica Múltipla x Técnica do Casquete. (XIII Semana Acadêmica de Odontologia)

Resistência à fratura de estruturas dentais com restaurações com inlays adesivas. (B 222) (16a Reunião Anual da Sociedade Brasileira de Pesquisa Odontologica)

Sistema Targis-Vectris: Aspectos Estruturais e Laboratoriais. (XIII Semana Acadêmica de Odontologia)

Sistema Targis-Vectris. Parte II: Caso Clínico. (XIII Semana Acadêmica de Odontologia)

Análise da estabilidade de cor de uma resina composta condensável frente a diferentes tempos de polimerização e variadas distâncias entre a fonte de luz e material restaurador. (XII Semana Acadêmica de Odontologia)

Cimentação Adesiva: Adesão à dentina e à liga não-nobre. (XII Semana Acadêmica de Odontologia)

Fratura Coronária em Dentes Permanentes. (XX Semana Odontológica da Associação Brasileira de Odontologia)

Hipersensibilidade Dentinária: Etiologia e Terapêutica (XX Semana Odontológica da Associação Brasileira de Odontologia)

Prótese Adesiva - Uma possibilidade de tratamento para ausência dentais anteriores e posteriores. (XX Semana Odontológica da Associação Brasileira de Odontologia)

A influência de diferentes espessuras e alturas de férulas na resistência à fratura de dentes tratados endodonticamente restaurados com pinos de fibra de vidro e núcleos metálicos fundidos: estudo piloto (31º Jornada Acadêmica Integrada da UFSM - 7º Salão de Pós-Graduação)

Degradação a baixas temperaturas de cerâmica YTZP: revisão sistemática e meta-análise (31º Jornada Acadêmica Integrada da UFSM - 31º Salão de Iniciação Cientifica)

Efeito do tempo de armazenamento na resistência ao push out entre pinos de fibra e dentina radicular de dois cimentos obturadores (31º Jornada Acadêmica Integrada da UFSM - 7º Salão de Pós-Graduação)

Limite de fadiga de uma zircônia policristalina estabilizada por óxido de ítrio: efeito do desgaste e da degradação hidrotêrmica (31º Jornada Acadêmica Integrada da UFSM - 31º Salão de Iniciação Cientifica)

Efeito do desgaste com pontas diamantadas e da degradação a baixas temperaturas no comportamento mecânico de uma cerâmica Y-TZP para restaurações monolíticas (30º Jornada Acadêmica Integrada da UFSM - 30º Salão de Iniciação Cientifica)

Efeito do jateamento com alumina e de diferentes sistemas primer/adesivo na adesão a zircônia (30º Jornada Acadêmica Integrada da UFSM - 30º Salão de Iniciação Cientifica)

Efeito de diferentes técnicas de reparo com resinas compostas após ltd na resistência de união de cerâmicas Y-TZP (29º Jornada Acadêmica Integrada da UFSM - 29º Salão de Iniciação Cientifica)

Efeitos de Diferentes Parâmetros de Jateamento com partículas de Sílica na Resistência de união de um cimento resinoso a Y -TZP e transformação de fase (29º Jornada Acadêmica Integrada da UFSM - 29º Salão de Iniciação Cientifica)

Adesão à Zircônia: estudo da deposição de filmes à base de sílica na superfície da Y-TZP (28º Jornada Acadêmica Integrada da UFSM (4º Salão de Pós-Graduação))

Efeito de diferentes concentrações de ácido fluorídrico no ângulo de contato e na resistência de união a uma cerâmica feldspática (28º Jornada Acadêmica Integrada da UFSM - 28º Salão de Iniciação Cientifica)

Efeito do desgaste com lixas e brocas diamantadas no comportamento mecânico de uma cerâmica Y-TZP (28º Jornada Acadêmica Integrada da UFSM - 28º Salão de Iniciação Cientifica)

Pinos de fibra: Considerações teóricas e aplicações clínicas. (Perni in fibra: Presuposti teorici e applicazioni cliniche.)

Seqüência clínica de técnica de moldagem com silicona de adição.

XIX Semana Odontológica de Santa Maria

I Semana de Trabalho Pedagógico

X Semana Acadêmica Odontológica

Soluções restauradores para dentes extensamente destruídos.

Especialização em Prótese Dental / Departamento de Materiais Odontológicos e Prótese

Próteses Metal-Free. Escolhendo o sistema cerâmico: feldspática X IPS Empress X ProCera X In-Ceram.

Curso de Atualização Teórico - Prático em Prótese Dental - UFSM

Curso de Atualização Teórico - Prático em Prótese Dental - UFSM

WORKSHOP - Curso Teórico - Prático: Microabrasão, Núcleos de Preenchimento com Pinos de Fibra de Carbono e Cimentação Adesiva de Onlay Cerâmica IPS Empress 2

Realidade da Odontologia

WORKSHOP - Curso Teórico - Prático: Cirurgia Periodontal / Preparo, Moldagem e Cimentação de Onlay de Cerâmica.

Fatigue-failure-load of lithium-disilicate crowns etched by hydrofluoric acid concentrations

Effect of different low-temperature aging protocols on the mechanical behavior of Y-TZP ceramic

Hydrofluoric acid concentration effect on resin adhesion to feldspathic ceramic

New approach for surface-modification of Y-TZP ceramics (Part I): YTZP-adhesion

Cementation strategy and mechanical-cycling effects on human-dentin and composite-inlays MTBS

Self-adhesive and conventional cements: bond strength to YTZP. (abstract # 0671)

Bond strength durability of resin cements to Y-TZP ceramic.

Coronal Macro-retentions and Diameter of Glass-FRC: Fracture-Resistance evaluation of Bovine-Teeth. (Abstract # 443)

Durabilidade da resistência de união de cimentos resinosos à cerâmica Y-TZP. (PNb 187)

Fatigue resistance of teeth with fiber post:effect of length cementation.

Efeito da ciclagem mecânica sobre a resistência de união de pinos de fibra cimentados com resina à dentina.

Mechanical cycling of FRC resin-bonded to root dentin.

Adesão a uma cerâmica a base de alumina-zircônio: Microtração Vs cisalhamento.

Effect of storage conditions on bonding to silica-coated zirconium-alumina ceramic.

Microtração Vs cisalhamento. O teste mecânico pode modificar os resultados de resistência adesiva entre uma cerâmica a base de alumina-zircônio e uma cimento resinoso?

Bonding to densely sintered high-purity alumina ceramic.

Efeito do tratamento da superfície cerâmica e do tipo cerâmica sobre a resistência adesiva entre um cimento resinoso e três sistemas cerâmicos.

Microtração de pinos de fibras em diferentes regiões da dentina, utilizando adesivos químico e foto-ativado.

Evaluation of the flexural strength of carbon fiber- and quartz fiber-based posts.

Influência do tratamento de superfície sobre a resistência à microtração entre In-Ceram Alumina e cimento resinoso.

Resistência adesiva entre um cimento resinoso e dois sistemas cerâmicos: efeito do tratamento da superfície cerâmica.

Resistência à microtração entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície.

Microtração de cerâmica aluminizada e cimento resinoso: efeito do tratamento da superfície cerâmica.

Análise da Resistência à Flexão de 8 Resinas Compostas Condensáveis e 4 Híbridas.

Efeito da configuração da cavidade em preparos classe II na microinfiltração sob restaurações de resina composta.

Análise da resistência à flexão de 8 resinas compostas condensáveis e 4 híbridas.

Alteração de cor de Resinas Compostas: Influência de diferentes corantes e análise do efeito do álcool

Aplicação dos Simuladores de pacientes em diferentes disciplinas do Curso de odontologia.

Aplicação dos Simuladores de pacientes nas diferentes disciplinas do Curso de Odontologia

Diagnóstico para tratamento com Implantes Ósseo - integrados

Fratura Coronária - Colagem de Fragmento Dental

Pinos Intracanal em Fibra de Carbono: Preservação e Reforço

Planejamento e Indicação de Implantes Ósseo - Integrados

Próteses Provisórias em Prótese Parcial Fixa

Radiopacidade de Materiais Restauradores

Resina Composta em dentes anteriores: Uma opção de Acabamento e Polimento

Resina Composta: Longevidade Estética

Resistência à fratura de estruturas dentais com Restaurações Intracoronárias Adesivas

Restaurações Cerâmicas: Técnica de Cimentação Adesiva

Restaurações Estéticas com Resina Composta: Fatores de sucesso

Simuladores de pacientes e modelos dentais para exercícios práticos de Odontologia

Técnica de Condensação de Nguyen para obturação em caso de reabsorção interna

Uma nova tendência: Restaurações Adesivas Cerâmicas

Cimentação Adesiva em coroa de porcelana.

Implantes Ósseo - Integrados: Quando indicar?

Seqüência de Acabamento e Polimento de Resinas Compostas em dentes anteriores e posteriores.

Emissão de 4 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista DENTAL MATERIALS

Parecer (3) de artigo para a revista J MECH BEHAV BIOMED MATER

Emissão de 4 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista DENTAL MATERIALS

Emissão de 4 pareceres técnicos de projetos submetido para editais do CNPq

Parecer (5) de artigo para a revista DENTAL MATERIALS

Emissão de 5 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista DENTAL MATERIALS

Emissão de 6 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista DENTAL MATERIALS

Parecer (1) de artigo para a revista JOURNAL OF ADHESIVE DENTISTRY

Parecer (1) de artigo para a revista JOURNAL OF MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

Emissão de 3 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista BRAZILIAN ORAL RESEARCH

Parecer (1) de artigo para a revista JOURNAL OF MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

Parecer (1) de artigo para a revistaBIOMEDICAL ENGINEERING

Parecer (2) de artigo para a revista DENTAL MATERIALS

Emissão de 3 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista JOURNAL OF ADHESIVE DENTISTRY

Parecer (1) de artigo para a revista JOURNAL OF PROSTHODONTIC RESEARCH

Parecer (2) de artigo para a revista DENTAL MATERIALS

Parecer (2) de artigo para a revista J MECHANICAL BEHAVIOR OF THE BIOMEDICAL MATERIALS

Parecer (2) de artigo para a revista JOURNAL OF PROSTHODONTICS

Emissão de 10 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista DENTAL MATERIALS

Parecer (1) de artigo para a revista INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Pareceres (10) de projetos de pesquisa para o CNPq.

Pareceres (10) de projetos de pesquisa para o PROBIC-FAPERGS-UFSM.

Pareceres (12) de projetos de pesquisa para o PIBIC-CNPq-UFSM.

Pareceres (2) de artigos para a revista EUROPEAN JOURNAL OF PROSTHODONTICS & RESTORATIVE DENTISTRY

Pareceres (2) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Pareceres (4) de artigos para a revista JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

Emissão de 10 pareceres técnicos de projetos submetidos em editais do CNPq

Pareceres (10) de projetos de pesquisa para o CNPq.

Pareceres (11) de projetos de pesquisa para o PROBIC-FAPERGS-UFSM.

Pareceres (9) de projetos de pesquisa para o PIBIC-CNPq-UFSM.

Emissão de 15 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Parecer (1) de artigo para a revista JOURNAL ADHESIVE DENTISTRY

Pareceres (15) de projetos de pesquisa para o CNPq.

Pareceres (2) de artigos para a revista DENTAL MATERIALS

Pareceres (6) de projetos de pesquisa para o PROBIC-FAPERGS-UFSM.

Pareceres (9) de projetos de pesquisa para o PIBIC-CNPq-UFSM.

Emissão de 8 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista ACTA ODONTOGICA SCANDINAVICA

Parecer (1) de artigo para a revista BRAZILIAN ORAL RESEARCH

Pareceres (2) de artigos para a revista DENTAL MATERIALS

Pareceres (3) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Pareceres (6) de projetos de pesquisa para o PROBIC-FAPERGS-UFSM.

Pareceres (7) de projetos de pesquisa para o PIBIC-CNPq-UFSM.

Pareceres (8) de projetos de pesquisa para o CNPq.

Emissão de 10 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista DENTAL MATERIALS

Pareceres (10) de projetos de pesquisa para o CNPq.

Pareceres (3) de projetos de pesquisa para o PRPGP/UFSM MCT/FINEP/CT-INFRA-PROINFRA 01/2011 PRPGP/UFSM MCT/FINEP/CT-INFRA-PROINFRA 01/2012

Pareceres (4) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Emissão de 13 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista INTERNATIONAL JOURNAL OF BIOMATERIALS

Parecer (1) de artigo para a revista JOURNAL OF ENDODONTICS

Pareceres (12) de projetos de pesquisa para o PIBIC-CNPq-UFSM.

Pareceres (13) de projetos de pesquisa para o CNPq.

Pareceres (3) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Pareceres (3) de projetos de pesquisa para o PRPGP/UFSM MCT/FINEP/CT-INFRA-PROINFRA 01/2011

Emissão de 21 pareceres técnicos de projetos submetidos em editais do CNPq

Pareceres (2) de artigos para a revista BRAZILIAN DENTAL SCIENCE

Pareceres (21) de projetos de pesquisa para o CNPq.

Pareceres (6) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Pareceres (9) de projetos de pesquisa para o PIBIC-CNPq-UFSM.

Emissão de 6 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo para a revista BRAZILIAN DENTAL SCIENCE

Parecer (1) de artigo para a revista JOURNAL ADHESIVE DENTISTRY

Parecer (1) de artigo para a revista JOURNAL OF APPLIED ORAL SCIENCE

Parecer (1) de artigo para a revista QUINTESSENCE INTERNATIONAL

Pareceres (7) de projetos de pesquisa para o CNPq.

Pareceres (9) de projetos de pesquisa para o PIBIC-CNPq-UFSM.

Emissão de 7 pareceres técnicos de projetos submetidos em editais do CNPq

Parecer (1) de artigo\ para a revista JOURNAL OF DENTISTRY

Pareceres (2) de artigos para a revista MATERIALS RESEARCH

Pareceres (5) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Pareceres (7) de projetos de pesquisa para o CNPq.

Parecer (1) de artigo para a revista BRAZILIAN DENTAL SCIENCE

Parecer (1) de artigos para a revista MATERIALS RESEARCH

Pareceres (5) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Parecer (1) de artigo para a revista BRAZILIAN DENTAL SCIENCE

Parecer (1) de projeto de pesquisa para o FAPESC (Chamada Publica FAPESC 007/2006)

Pareceres (2) de artigos para a revista JOURNAL ADHESIVE DENTISTRY

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'European Journal of Prosthodontics and Restorative Dentistry'

Revisor de periódico 'International Journal of Adhesion and Adhesives'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Journal of the Mechanical Behavior of Biomedical Materials (Print)'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Acta Odontologica Scandinavica (Trykt utg.)'

Revisor de periódico 'Brazilian Oral Research (Impresso)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Dental Materials'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'International Journal of Biomaterials'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Journal of Endodontics'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Journal of Applied Oral Science (Impresso)'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Quintessence International'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Journal of Dentistry'

Revisor de periódico 'Materials Research (São Carlos. Impresso)'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Materials Research'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Revisor de periódico 'Ciência Odontológica Brasileira'

Revisor de periódico 'Revista de Odontologia da UNESP (0101-1774)'

Revisor de periódico 'The journal of adhesive dentistry (1461-5185)'

Viscosidade de cimento resinoso e seu efeito no comportamento mecânica a fadiga de uma cerâmicas a base de 5Y-FSZ

Avaliação dos parâmetros de teste utilizados para induzir fadiga cíclica em materiais restauradores dentários

Efeito de diferentes tempos de um primer cerâmico autocondicionante na adesão e no comportamento à fadiga de uma cerâmica de dissilicato de lítio

Simulação in vitro da usinagem CAD/CAM de uma cerâmica vítrea de dissilicato de lítio: efeito sobre a adesão a cimento resinoso e no comportamento mecânico a fadiga de restaurações aderidas

Efeito do jateamento com um novo material a base de alumina revestido por diferentes concentrações de silica na adesão e nas propriedades mecânicas da Y-TZP

Comportamento mecânico de uma cerâmica Y-TZP: efeito de tratamentos de superfície e técnicas de processamento

Efeito de diferentes tratamentos de superfície na resistência à flexão biaxial e resistência de união entre cimento resinoso e uma cerâmica Y-TZP

Efeito do condicionamento com diferentes concentrações de ácido fluorídrico no limite de fadiga de pre-molares restaurados com inlays cerâmicas.

Efeito do desgaste e do envelhecimento de uma cerâmica YTZP no comportamento mecânico da cerâmica.

Efeito do envelhecimento em baixa temperatura e desgaste no comportamento mecânico de uma cerâmica Y-TZP com duas espessuras diferentes indicada para restauração monolítica

Efeito do condicionamento com diferentes concentrações de ácido fluorídrico na resistência flexural de uma cerâmica de dissilicato de lítio.

Abrasão com lixas diamantadas X pontas diamantadas: Efeito da LTD no comportamento mecânico de cerâmica Y-TZP

Efeito da concentração do acido fluoridrico na adesão entre ceramica-cimento e no comportamento mecânico da cerâmica.

Adesão à zircônia: estudo da deposição de filmes à base de sílica na superfície da Y-TZP

Comparação de ensaios mecânicos para avaliar a resistência adesiva a cerâmica YTZP

Efeito da técnica de obturação e do tipo de instrumentação na resistência à fadiga de raízes restaurda com pinos de fibra..

Efeitos de diferentes estratégias de reconstrução de dentes tratados endodonticamente na resistência à fadiga.

Efeito de diferentes metodos de instrumentação endodôntica, tipo de retentor intrarradicular e ciclagem mecânica na resistência à fratura de raízes

Restaurações inlays cerâmicas em pre-molares: efeito da estratégia de cimentação e da ciclagem mecânica na resistência adesiva entre dentina e restauração

Condicionamento da superfície de pinos de fibra: avaliação da resistência adesiva ao pino após ciclagem mecânica e da resistência à flexão dos pinos.

Efeito da ciclagem mecânica na resistência de união entre um pino de fibra e dentina intrarradicular, utilizando diferentes estratégias de cimentação.

Avaliação da resistência adesiva entre um cimento resinoso e uma cerâmica feldspática submetida a diferentes métodos de condicionamento.

Efeito de diferentes valores de ph de adesivos sobre a adesão de três cimentos resinosos a uma cerâmica feldspática.

Resistência de união de diferentes cimentos resinosos entre pinos de fibra e dentina intra-radicular.

Orientação de Estágio Profissional em Clínica Integrada de Prótese

Orientação de Monitoria em Clínica de Oclusão

Pinos intra-canais pré-fabricados: uma visão crítica da ciência

Avaliação da microdureza de resinas compostas condensáveis

Diagnóstico e tratamento do bruxismo em pacientes odontopediatra

Estética, Resistência e Preservação - Uma nova Era: Pino cerâmico, Núcleo de Preenchimento e Coroa Ceramo-Cerâmica - Parte I.

Estética, Resistência e Preservação - Uma nova Era: Pino cerâmico, Núcleo de Preenchimento e Coroa Ceramo-Cerâmica - Parte II.

Orientação de Estágio Profissional em Clínica Integrada de Prótese

Orientação de Monitoria em Clínica de Oclusão

Otimização dos Sistemas Cerâmicos

Otimização e precisão da moldagem em Prótese Fixa - Técnica Múltipla x Técnica do Casquete

Pinos Pré-fabricados - nova alternativa aos Núcleos Metálicos Fundidos

Resistência à Fratura de estruturas dentais com restaurações com inlays adesivas

Sistema Targis - Vectris: apresentação de caso clínico (Parte II).

Sistema Targis / Vectris - aspectos estruturais e laboratoriais (Parte I)

Análise da Estabilidade de cor de uma resina composta condensável frente a diferentes tempos de polimerização e distância entre a fonte de luz e materiais restauradores.

Fratura Coronária em Dentes Permanentes

Hipersensibilidade Dentinária

Hipersensibilidade Dentinária.

Otimização das Restaurações Cerâmicas: Uma visão crítica da Ciência

Prótese Adesiva - Uma alternativa para dentes anteriores e posteriores

Influência de tratamentos de superfície e cimentos resinosos no comportamento mecânico e adesivo de cerâmicas vítreas

Materiais análogos à dentina Vs dentina humana: efeito no comportamento mecânico a fadiga de uma cerâmica vítrea e na adesão

Variáveis relacionadas ao comportamento em fadiga e modo de falha de restaurações CAD/CAM

Comportamento mecânico sob fadiga de restaurações monolíticas de zircônia policristalina totalmente estabilizada: efeito de diferentes tratamentos de superfície.

Influência do material de substrato no comportamento mecânico à fadiga de cerâmicas odontológicas cimentadas adesivamente

Efeito da adesão ao cimento resinoso em diferentes viscosidades no comportamento à fadiga da cerâmica de dissilicato de lítio usinada

Comportamento mecânico de cerâmicas Y-TZP para restaurações monolíticas

Comportamento mecânico em fadiga de YSZ: efeitos de diferentes tratamentos de superfície e materiais a base de zirconia

Comportamento em fadiga e adesão a uma cerâmica de dissilicato de lítio: efeito de diferentes concentrações de ácido fluorídrico

Efeito da concentração de ácido fluorídrico na carga para falha em fadiga de uma cerâmica feldspática cimentada

Efeito do tratamento da superfície interna de coroas em YTZP na resistência a retenção

Comportamento mecânico e fadiga de cerâmicas Y-TZP: efeito do desgaste e do envelhecimento?

Efeito de duas técnicas de gradação da zircônia no limite de fadiga e na sobrevida de próteses parciais fixas monolíticas de três elementos

Colonização bacteriana na região marginal de restaurações cerâmicas: efeito do método de remoção do cimento e do polimento

Caracterização da resistência mecânica de cerâmicas a base de zircônia: influência de novos metodos de tratamento de superfície.

Retenção de coroas em YTZP com diferentes substratos, tratamentos de superfície e cimentos.

Taxa de sobrevida, carga para fratura e análise por elementos finitos de dentes anteriores restaurados com facetas cerâmicas variando o desenho do preparo

Avaliação da resistência à tração de coroas totalmente cerâmicas sobre diferentes substratos e agentes cimentantes: efeito da ciclagem mecânica

Avaliação do efeito da ciclagem mecânica em pré-molares restaurados pela técnica direta e indireta

Resistência de união e discrepância marginal absoluta de infraestruturas feitas em cerâmica Y-TZP: influência de novos mêtodos de tratamento de superfêcie.

Efeito do desgaste com pontas diamantadas no comportamento mecânico de uma cerâmica y-tzp para restaurações monolíticas

Effects of different sandblasting parameters with silica particles on bond strength of a resin cement and ceramic Y-TZP and phase transformation

Efeito de diferentes concentrações de ácido fluorídrico no ângulo de contato e na resistência de união a uma cerâmica feldspática ? Resultados Preliminares

Efeito do desgaste com lixas e brocas diamantadas no comportamento mecânico de uma cerâmica Y-TZP

Efeito do corte com diferentes instrumentos rotatórios na integridade, micromorfologia e resistência à flexão de pinos de fibra de vidro.

Evaluation of four cementation strategies on the push-out bond strength between fiber post and root dentin

Microtensile bond strength between indirect composite resin inlays and dentin: effect of cementation strategy and mechanical aging.

Resistência à fratura, avaliação qualitativa pós-ciclagem mecânica e análise de elementos finitos de pinos de fibra de vidro com diferentes diâmetros

Efeito da ciclagem mecânica na resistência de união entre uma cerâmica feldspática e dentina coronária humana utilizando diferentes protocolos de cimentação ? resultados preliminares

Mechanical fatigue cycling on teeth restored with fiber posts: impact of coronal macro-retentions and diameter of a glass-FRC on fracture resistance.

Different strategies for post cementation: fatigue resistance and pull-out bond strength evaluation